User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Read a data block
- 4-4-4. Write a data block
- 4-4-5. Read a value block
- 4-4-6. Initialize a value block
- 4-4-7. Write master key (key A)
- 4-4-8. Increment value
- 4-4-9. Decrement value
- 4-4-10. Copy value
- 4-4-11. Read a data page (Ultralight & NTAG203)
- 4-4-12. Write a data Page (Ultralight & NTAG203)
- 4-4-13. Download Key
- 4-4-15. Request for Answer to Select (ISO14443-4)
- 4-4-16. Exchange Transparent Data (T = CL)
- 4-4-17. LED Control
- 4-4-18. Power Down
- 4-4-19. 3Des Authentication(Utralight C)
- 4-4-20. Update Key(Utralight C)
- 4-4-21. Write Perso
- 4-4-22. Commit Perso
- 4-4-23. Get firmware version
- 4-4-24. Turn on/off Auto-detection
- 5. DIFFERENCES FROM PREVIOUS VERSION
StrongLink SL032 V3.1
http://www.stronglink-rfid.com
10
0x05: Write fail
0x06: Unable to read after write
0x0D: Not authenticate
0xF0: Checksum error
Value: Valu e written if the operation succeeds, 4 bytes.
4-4-7. Write master key (key A)
0xBA
Len
0x07
Sector
Key
Checksum
Sector: The sector number to be written, 1 byte.
Key: Authentication key, 6 bytes
Response:
0xBD
Len
0x07
Status
Key
Checksum
Status: 0x00: Operation succeed
0x05: Write fail
0x0D: Not authenticate
0xF0: Checksum error
Key: Authentication key written if the operation succeeds, 6 bytes.
4-4-8. Increment value
0xBA
Len
0x08
Block
Valu e
Checksum
Block: The block number to be increased, 1 byte.
Value: The value to be increased by, 4 bytes.
Response:
0xBD
Len
0x08
Status
Valu e
Checksum
Status: 0x00: Operation succeed
0x05: Write fail
0x06: Unable to read after write
0x0D: Not authenticate
0x0E: Not a value block
0xF0: Checksum error
Value: The value after increment if the operation succeeds, 4 bytes
4-4-9. Decrement value
0xBA
Len
0x09
Block
Valu e
Checksum
Block: The block number to be decreased, 1 byte
Value: The value to be decreased by, 4 bytes
Response:
0xBD
Len
0x09
Status
Valu e
Checksum
Status: 0x00: Operation succeed
0x05: Write fail
0x06: Unable to read after write
0x0D: Not authenticate
0x0E: Not a value block