User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Read a data block
- 4-4-4. Write a data block
- 4-4-5. Read a value block
- 4-4-6. Initialize a value block
- 4-4-7. Write master key (key A)
- 4-4-8. Increment value
- 4-4-9. Decrement value
- 4-4-10. Copy value
- 4-4-11. Read a data page (Ultralight & NTAG203)
- 4-4-12. Write a data Page (Ultralight & NTAG203)
- 4-4-13. Download Key
- 4-4-15. Request for Answer to Select (ISO14443-4)
- 4-4-16. Exchange Transparent Data (T = CL)
- 4-4-17. LED Control
- 4-4-18. Power Down
- 4-4-19. 3Des Authentication(Utralight C)
- 4-4-20. Update Key(Utralight C)
- 4-4-21. Write Perso
- 4-4-22. Commit Perso
- 4-4-23. Get firmware version
- 4-4-24. Turn on/off Auto-detection
- 5. DIFFERENCES FROM PREVIOUS VERSION
StrongLink SL032 V3.1
http://www.stronglink-rfid.com
3
1. MAIN FEATURES
*This picture may not be exactly the same as real object.
• Tags supported: Mifare 1k, Mifare 4k, Mifare UltraLight, Mifare
UltraLight C, NTAG203, DESFire, DESFire EV1 and Mifare Plus
2K/4K
• Built-in antenna
• UART interface, baud rate 9,600 ~ 115,200 bps
• 2.7 ~ 3.6V VDC operating, I/O pins are 5V tolerant
• Work current less than 45mA @3.3V
• Power down current less than 10uA
• Operating distance: Up to 50mm, depending on tag
• Storage temperature: -40 ºC ~ +85 ºC
• Operating temperature: -25 ºC ~ +55 ºC
• Dimension: 46 × 46 × 3 mm
• The OUT pin at low level indicates tag in detective range, and high
level indicating tag out
• Auto-detection: LED is on when card is in the detection range
1
1
Suppots all cards above except ISO14443-4 cards like DESFire/DESFire EV1 and MifarePlus L0/L2/L3. There is