User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- 3. baud rate Setting
- 4. Communication Protocol
- 4-1. Communication Setting
- 4-2. Communication Format
- 4-3. Command Overview
- 4-4. Command List
- 4-4-1. Select Mifare card
- 4-4-2. Login to a sector
- 4-4-3. Read a data block
- 4-4-4. Write a data block
- 4-4-5. Read a value block
- 4-4-6. Initialize a value block
- 4-4-7. Write master key (key A)
- 4-4-8. Increment value
- 4-4-9. Decrement value
- 4-4-10. Copy value
- 4-4-11. Read a data page (Ultralight & NTAG203)
- 4-4-12. Write a data Page (Ultralight & NTAG203)
- 4-4-13. Download Key
- 4-4-15. Request for Answer to Select (ISO14443-4)
- 4-4-16. Exchange Transparent Data (T = CL)
- 4-4-17. LED Control
- 4-4-18. Power Down
- 4-4-19. 3Des Authentication(Utralight C)
- 4-4-20. Update Key(Utralight C)
- 4-4-21. Write Perso
- 4-4-22. Commit Perso
- 4-4-23. Get firmware version
- 4-4-24. Turn on/off Auto-detection
- 5. DIFFERENCES FROM PREVIOUS VERSION
StrongLink SL032 V3.1
http://www.stronglink-rfid.com
8
4-4. Command List
4-4-1. Select Mifare card
0xBA
Len
0x01
Checksum
Response:
0xBD
Len
0x01
Status
UID
Type
Checksum
Status: 0x00: Operation succeed
0x01: No tag
0x0A: Collision occur
0xF0: Checksum error
UID: The uniquely serial number of Mifare carde
Type:
MFMini_4B 0x01
MFMini_7B 0x02
MF1K_4B UID/ MFPLUS2K SL1_4B UID 0x03
MF1K_7B UID/ MFPLUS2K SL1_7B UID 0x04
MF4K_4B UID/ MFPLUS4K SL1_4B UID 0x05
MF4K_7B UID/ MFPLUS4K SL1_7B UID 0x06
MF Ultralight/MF Ultralight C/Ntag 203 0x07
MF DESFire/MF DESFire EV1 0x09
MF PROX 0x0B
MFPLUS2K SL2_4B UID 0x21
MFPLUS4K SL2_4B UID 0x22
MFPLUS2K SL2_7B UID 0x23
MFPLUS4K SL2_7B UID 0x24
MFPLUS2K SL0/SL3_4B UID
2
4-4-2. Login to a sector
0x31
MFPLUS4K SL0/SL3_4B UID 0x32
MFPLUS2K SL0/SL3_7B UID 0x33
MFPLUS4K SL0/SL3_7B UID 0x34
Other 0x00
0xBA
Len
0x02
Sector
Type
Key
Checksum
Sector: Sector need to login
Type: Key type (0xAA: authenticate with KeyA, 0xBB: authenticate with KeyB)
Key: Authenticate key, 6 bytes
Response:
0xBD
Len
0x02
Status
Checksum
Status: 0x02: Login succeed
0x03: Login fail
0xF0: Checksum error
2
Mifare Plus SL0 and SL3 can tell differences via ATS(ISO14443-4). Before ATS, they have the same ATQA and
SAK(ISO14443-3). SL032 judges card type only via ISO14443-3 layer for the compatibility.