User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- Device Operation
- Command Description
- 4-2. Command Overview
- 4-3. Command List
- 4-3-1. Select Mifare card
- 4-3-2. Login to a sector
- 4-3-3. Download Key into SL030
- 4-3-4. Login sector via stored key
- 4-3-5. Read a data block
- 4-3-6. Write a data block
- 4-3-7. Read a value block
- 4-3-8. Initialize a value block
- 4-3-9. Write master key (KeyA)
- 4-3-10. Increment value
- 4-3-11. Decrement value
- 4-3-12. Copy value
- 4-3-13. Read a data page (UltraLight & NTAG203)
- 4-3-14. Write a data Page (UltraLight & NTAG203)
- 4-3-15. Request for Answer to Select (ISO14443-4)
- 4-3-16. Exchange Transparent Data (T = CL)
- 4-3-17. LED Control
- 4-3-18. Power Down
- 4-3-19. Write Perso
- 4-3-20. Commit Perso
- 4-3-21. Get firmware version
- 4-3-22. Turn on/off Auto-detection
- 4-3. Command List
- Differences from previous version
StrongLink SL030 3.1
http://www.stronglink-rfid.com
10
Host Write:
Len
0x12
Sector
Type
Key
Sector: 0x00 – 0x27
Type: Key type (0xAA: KeyA, 0xBB: KeyB)
Key: 6 bytes, stored into SL030
Host Read:
Len
0x12
Status
Status: 0x00: Operation succeed
0x08: Address overflow
0x09: Download fail
Note: Some delay is needed between Host Write and Host Read.
4-3-4. Login sector via stored key
Host Write:
Len
0x13
Sector
Type
Sector: Sector need to login, 0x00 – 0x27
Type: Key type (0xAA: KeyA, 0xBB: KeyB)
Host Read:
Len
0x13
Status
Status: 0x02: Login succeed
0x03: Login fail
0x08: Address overflow
4-3-5. Read a data block
Host Write:
Len
0x03
Block
Block: The absolute address of block to be read, 1 byte
Host Read:
Len
0x03
Status
Data
Status: 0x00: Operation succeed
0x01: No tag
0x04: Read fail
0x0D: Not authenticate
Data: Block data returned if operation succeeds, 16 bytes.
4-3-6. Write a data block
Host Write:
Len
0x04
Block
Data
Block: The absolute address of block to be written, 1 byte.
Data: The data to write, 16 bytes.
Host Read:
Len
0x04
Status
Data
Status: 0x00: Operation succeed