User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- Device Operation
- Command Description
- 4-2. Command Overview
- 4-3. Command List
- 4-3-1. Select Mifare card
- 4-3-2. Login to a sector
- 4-3-3. Download Key into SL030
- 4-3-4. Login sector via stored key
- 4-3-5. Read a data block
- 4-3-6. Write a data block
- 4-3-7. Read a value block
- 4-3-8. Initialize a value block
- 4-3-9. Write master key (KeyA)
- 4-3-10. Increment value
- 4-3-11. Decrement value
- 4-3-12. Copy value
- 4-3-13. Read a data page (UltraLight & NTAG203)
- 4-3-14. Write a data Page (UltraLight & NTAG203)
- 4-3-15. Request for Answer to Select (ISO14443-4)
- 4-3-16. Exchange Transparent Data (T = CL)
- 4-3-17. LED Control
- 4-3-18. Power Down
- 4-3-19. Write Perso
- 4-3-20. Commit Perso
- 4-3-21. Get firmware version
- 4-3-22. Turn on/off Auto-detection
- 4-3. Command List
- Differences from previous version
StrongLink SL030 3.1
http://www.stronglink-rfid.com
12
0x08: Address overflow
0x0D: Not authenticate
Key: Authentication key written if the operation succeeds, 6 bytes.
Attention: Be sure KeyB is readable, otherwise KeyB will be change to 000000000000
after this command.
4-3-10. Increment value
Host Write:
Len
0x08
Block
Value
Block: The absolute address of block to be increased, 1 byte.
Value: The value to be increased by, 4 bytes.
Host Read:
Len
0x08
Status
Value
Status: 0x00: Operation succeed
0x01: No tag
0x05: Write fail
0x06: Unable to read after write
0x0D: Not authenticate
0x0E: Not a value block
Value: The value after increment if the operation succeeds, 4 bytes
4-3-11. Decrement value
Host Write:
Len
0x09
Block
Value
Block: The absolute address of block to be decreased, 1 byte
Value: The value to be decreased by, 4 bytes
Host Read:
Len
0x09
Status
Value
Status: 0x00: Operation succeed
0x01: No tag
0x05: Write fail
0x06: Unable to read after write
0x0D: Not authenticate
0x0E: Not a value block
Value: The value after decrement if the operation succeeds, 4 bytes
4-3-12. Copy value
Host Write:
Len
0x0A
Source
Destination
Source: The source block copy from, 1 byte
Destination: The destination copy to, 1 byte
The source and destination must in the same sector
Host Read: