User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- Device Operation
- Command Description
- 4-2. Command Overview
- 4-3. Command List
- 4-3-1. Select Mifare card
- 4-3-2. Login to a sector
- 4-3-3. Download Key into SL030
- 4-3-4. Login sector via stored key
- 4-3-5. Read a data block
- 4-3-6. Write a data block
- 4-3-7. Read a value block
- 4-3-8. Initialize a value block
- 4-3-9. Write master key (KeyA)
- 4-3-10. Increment value
- 4-3-11. Decrement value
- 4-3-12. Copy value
- 4-3-13. Read a data page (UltraLight & NTAG203)
- 4-3-14. Write a data Page (UltraLight & NTAG203)
- 4-3-15. Request for Answer to Select (ISO14443-4)
- 4-3-16. Exchange Transparent Data (T = CL)
- 4-3-17. LED Control
- 4-3-18. Power Down
- 4-3-19. Write Perso
- 4-3-20. Commit Perso
- 4-3-21. Get firmware version
- 4-3-22. Turn on/off Auto-detection
- 4-3. Command List
- Differences from previous version
StrongLink SL030 3.1
http://www.stronglink-rfid.com
14
4-3-16. Exchange Transparent Data (T = CL)
Len
0x21
Data
Data: COS command
Response:
Len
0x21
Status
Data
Status: 0x00: Operation succeed
0x11: Communicate with card failed
Data: Response data from card
4-3-17. LED Control
Host Write:
Len
0x40
Data
Data: 0x00: LED off
0x01: LED on
Host Read:
Len
0x40
Status
Status: 0x00: Operation succeed
4-3-18. Power Down
Host Write:
Len
0x50
Host Read:
Len
0x50
Status
Status: 0x00: Operation succeed
Note: Some delay is needed when waking up SL030.
4-3-19. Write Perso
Host Write:
Len
0x80
Bnr
Data
Bnr: 2Byte Block or Key Address to be written, MSB first.
For example,
Master Key Address is 0x9000, and write it as 0xFFFF..FF(16Bytes)
13809000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFh
Configuration Key Address is 0x9001, and write it as 0xFFFF..FF(16Bytes)
13809001FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFh
Switch to Level 2 Key Address is 0x9002, and write it as 0xFFFF..FF(16Bytes)
13809002FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFh
Switch to Level 3 Key Address is 0x9003, and write it as 0xFFFF..FF(16Bytes)
13809003FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFh
Data: Value of the key or data
Host Read:
Len
0x80
Status
Status: 0x00: Operation succeed
0x11: Communicate with card failed
0x12: Card Write Perso failed