User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- Device Operation
- Command Description
- 4-2. Command Overview
- 4-3. Command List
- 4-3-1. Select Mifare card
- 4-3-2. Login to a sector
- 4-3-3. Download Key into SL030
- 4-3-4. Login sector via stored key
- 4-3-5. Read a data block
- 4-3-6. Write a data block
- 4-3-7. Read a value block
- 4-3-8. Initialize a value block
- 4-3-9. Write master key (KeyA)
- 4-3-10. Increment value
- 4-3-11. Decrement value
- 4-3-12. Copy value
- 4-3-13. Read a data page (UltraLight & NTAG203)
- 4-3-14. Write a data Page (UltraLight & NTAG203)
- 4-3-15. Request for Answer to Select (ISO14443-4)
- 4-3-16. Exchange Transparent Data (T = CL)
- 4-3-17. LED Control
- 4-3-18. Power Down
- 4-3-19. Write Perso
- 4-3-20. Commit Perso
- 4-3-21. Get firmware version
- 4-3-22. Turn on/off Auto-detection
- 4-3. Command List
- Differences from previous version
StrongLink SL030 3.1
http://www.stronglink-rfid.com
15
4-3-20. Commit Perso
Host Write:
Len
0x81
This command commit the Write Perso and switch the card to security level 1(SL1 card) or
level 3(SL3 card).
Host Read:
Len
0x81
Status
Status: 0x00: Operation succeed
0x11: Communicate with card failed
0x13: Card Commit Perso failed
Attention: According to NXP MifarePlus card document, Commit Perso will make effect
after you have “Write Perso” the Master KEY, Configuration KEY and SWL3 K E Y.
If your card is L1 card, after Commit Perso, the card will switch L0 to L1;
If your card is L3 card, after Commit Perso, the card will switch L0 to L3.
4-3-21. Get firmware version
Host Write:
Len
0xF0
Host Read:
Len
0xF0
Status
Data
Status: 0x00: Operation succeed
Data: firmware version.
4-3-22. Turn on/off Auto-detection
Host Write:
Len
0xFE
Data
Data: 0x00: Turn off Auto-detection
0x01: Turn on Auto-detection
For example,
02FE00h // Turn off Auto-detection
02FE01h // Turn on Auto-detection
Host Read:
Len
0xFE
Status
Status: 0x00: Operation succeed
5. DIFFERENCES FROM PREVIOUS VERSION
Although we make efforts on the compatibility between the new SL030 V3.0 and the
old SL030 V1.0-V2.3, there are still some differences you need to know.
1. New SL030 has a new auto-detection function which can close automatically when
there is a DESFire or MifarePlus L0/L2/L3 card coming into the detection range,
and the light will be on even if the card is out of field. By the way, we also offer you
the Turn On/Off Auto-detection command.
2. New SL030 supports nearly all cards of NXP Mifare series now and we rebuilt the
card type characters.(Details see to Command Select Mifare Card Description)