User's Manual
Table Of Contents
- Main Features
- PINNING INFORMATION
- Device Operation
- Command Description
- 4-2. Command Overview
- 4-3. Command List
- 4-3-1. Select Mifare card
- 4-3-2. Login to a sector
- 4-3-3. Download Key into SL030
- 4-3-4. Login sector via stored key
- 4-3-5. Read a data block
- 4-3-6. Write a data block
- 4-3-7. Read a value block
- 4-3-8. Initialize a value block
- 4-3-9. Write master key (KeyA)
- 4-3-10. Increment value
- 4-3-11. Decrement value
- 4-3-12. Copy value
- 4-3-13. Read a data page (UltraLight & NTAG203)
- 4-3-14. Write a data Page (UltraLight & NTAG203)
- 4-3-15. Request for Answer to Select (ISO14443-4)
- 4-3-16. Exchange Transparent Data (T = CL)
- 4-3-17. LED Control
- 4-3-18. Power Down
- 4-3-19. Write Perso
- 4-3-20. Commit Perso
- 4-3-21. Get firmware version
- 4-3-22. Turn on/off Auto-detection
- 4-3. Command List
- Differences from previous version
StrongLink SL030 3.1
http://www.stronglink-rfid.com
9
4-3. COMMAND LIST
4-3-1. Select Mifare card
Host Write:
Len
0x01
Host Read:
Len
0x01
Status
UID
Type
Status: 0x00: Operation succeed
0x01: No tag
UID: The uniquely serial number of Mifare card
Type:
MFMini_4B 0x01
MFMini_7B 0x02
MF1K_4B UID/ MFPLUS2K SL1_4B UID 0x03
MF1K_7B UID/ MFPLUS2K SL1_7B UID 0x04
MF4K_4B UID/ MFPLUS4K SL1_4B UID 0x05
MF4K_7B UID/ MFPLUS4K SL1_7B UID 0x06
MF Ultralight/MF Ultralight C/Ntag 203 0x07
MF DESFire/MF DESFire EV1 0x09
MF PROX 0x0B
MFPLUS2K SL2_4B UID 0x21
MFPLUS4K SL2_4B UID 0x22
MFPLUS2K SL2_7B UID 0x23
MFPLUS4K SL2_7B UID 0x24
MFPLUS2K SL0/SL3_4B UID
2
4-3-2. Login to a sector
0x31
MFPLUS4K SL0/SL3_4B UID 0x32
MFPLUS2K SL0/SL3_7B UID 0x33
MFPLUS4K SL0/SL3_7B UID 0x34
Other 0x00
Host Write:
Len
0x02
Sector
Type
Key
Sector: Sector need to login, 0x00 – 0x27
Type: Key type (0xAA: authenticate with KeyA, 0xBB: authenticate with KeyB)
Key: Authenticate key, 6 bytes
Host Read:
Len
0x02
Status
Status: 0x02: Login succeed
0x01: No tag
0x03: Login fail
0x08: Address overflow
4-3-3. Download Key into SL030
2
Mifare Plus SL0 and SL3 can tell differences via ATS(ISO14443-4). Before ATS, they have the same ATQA and
SAK(ISO14443-3). SL030 judges card type only via ISO14443-3 layer for the compatibility.