User's Manual

WFDS User Manual
TELESTONE Proprietary © 2009 TELESTONE. All rights reserved. 7
The RF port is in the rear side of cabinet.
Figure 3 RU connector
2.5.2 EU and RU Address Setting
EU Address Setting:
Switch dip down means ON
The Address of MU does not need to be set
The left side of Address from 1-4 dips mean: Each dip shows the cascaded degree of
EU. For example, if the dip 1 is on, it means the current EU is placed in the 1st – degree
of cascaded connection. If the dip 2 is on, it means the current EU is placed in 2nd –
degree of cascaded connection. (WFDS supports Max two- degree cascaded EU
connection)
The right side of Address from 1-8 dips mean: The port number of upper equipment
connected with current EU.
For example, if No.5 dip is on, it means the current EU is connected to the 5th port of
upper EU or MU.
Example: