WIFI Setup (UP Studio) 3\ 3-2 Click network to choose an available network ( user can also use touch screen panel to setup WIFI connection). Choose your network from the drop down list.
WIFI Setup (UP Studio) 4\ 3-3 Input the password for the WIFI network. 5\ If “Private” is set to ON, a private password could be optionally added to limit printer WIFI access to trusted users. Please note that the password is a weak protection that can be accessed and changed by anyone who can connect the machine through USB. 6\ Printer Tab Disconnect USB and choose available printers on the network to operate through WIFI.
Set Materials (Touch Screen) Decrease Material Weight adjustment Increase current material weight Save current setting Stop extru-sion and heating Back withdraw material Change Ma- terial extrude material Set Materials (UP Studio) Extrude Filament Withdraw Filament Stop All Actions Select Material Input Material weight
Set Nozzle Height (UP Studio) For setting nozzle height with touch screen please refer to page 16. Open the Calibration panel At the Nozzle Height section, click “Auto” will initiate the automatic nozzle height de- tection process. Clicking +/- button will move the platform up and down, or user could input a specific value at the text field and click “To” button the move the platform to a specific height. Click save will replace nozzle height value with current platform height.
Machine Configuration WIFI switch, if swithed off the WIFI setting button will not appear. Peheat switch, when turned on, for every print job, the printer will first preheat 15min before proceed to printing. internal lighting switch WIFI setting button Turn on or off the internal air filtration.
Language and Factory Reset Model: current machine model S.N.: machine serial number Firmware Ver: shows current firmware version Print Time: total print time count Print Weight: total print weight count Actived Date: the date of printer activation MAC: mac address of printer Reset: revert to factory setting. This will change some machine setting to default; remove total printed time and weight data. Language: choose language.
Error Prompts Suggested solution, in this case: Contact support Error Message Error code Other possible error prompt: Unplug printer and restart reinitialize the printer
Rotating Models (UP Studio) Choose the model and Click rotate button. Choose rotation axis User could input a spe- cific value or choose a preset value for rotation. Alternatively, user could use the rotation guide to rotate model in real time by hold and drag with mouse.
Scaling Models (UP Studio) Choose the model and Click rotate button. By default the scaling is in all axes. User could also choose a specific axis for scaling. User could input a specific scaling factor or choose a preset value Click MM or INCH to con- vert models to sizes of corresponding units. Alternatively, user could use the scaling guide on the model. User could scale in a specific axis or scale in all directions by hold and drag with mouse.
Move Model (UP Studio) Choose the model and click the Move button. Choose the the direction of movement User could input a specific value or choose a preset value for distance of move- ment. Alternatively, user could use the translational guide on the model to move on the X-Y plane or a single direc- tion by hold and drag with mouse.
Print Preference 2-1 Surface: the number layers at the sealing the top and the bottom of the printed object. Angle: This determine at which angle the Surface layers start to be printed. Dense: Choose the number of dense layers between support and supported surfaces. Angle: Determine the angle which support and dense layer to gen- erated. Area: Determine the minimal area of surface that will be supported, area less than this vaule will not be supported.
Print Preference 2-2 No Raft: print without raft. No Support: print without support Stable Support: Support structure will be stronger but less easy to be removed. Unsolide Model: The software will autofix nonsolid models Thin Wall: The Software will detect wall thickness that is too thin to print and expand the feature to a printable size. Keep Heating: The platform will be heated after print job is completed.
Printing Parameters Surface Infill Surface Support Dense (support) Raft Print Platform Suppot Range: < 30o Support Range: < 90o Dense: Solid support structure ensures that the surface being supported retains its shape and surface finish. Infill: The inner structure of the printed object. The density of the infill can be ad- justed. Raft: The thick structure that assists with the adhesion of the object to the plat- form. Surface: The top and bottom layers of the printed object.
Printer Info Printer info will be displayed by clicking the small button on the top left hand corner of the connected printer icon. Information including printer type, serial number and firmware version will be displayed. User could also set a custom name for the printer at the name field.
Software Version and Update Check Auto Update to allow the software to inform user the latest version.
Convert Picture Into 3D Model 2-1 Click add picture button and select a picture. The Base height determine the thickness of a The convert negative but- ton will reverse flat layer that will hold the picture. the pixel intensity so that user could choose Model Height determine the contrast of the finally print. the picture to be protruding from or sunken into the base.
Convert Picture Into 3D Model 2-2 Update 3D model button. This button will convert the modi- fied picture on the left to a 3D rendering on the right. OK button send the 3D rendering to the 3D printing interface for printing.
Printing Techniques Ensure accurate nozzle height. If the nozzle height value is too low, it will cause warping; if it is too high, it will crash the nozzle into the platform, causing damage and clogging. You can manually fine-tune the nozzle height value in the "Calibation" panels. You can try to adjust the nozzle height value plus or minus 0.1 –0.2mm from the base on previous re- sults. Calibrate the printing platform well. An unleveled platform usually causes warping.
Printer Maintenance - Air Filter Replacement Change air filter for air filatraton unit. It is recommmended to change the filter for every 300 hours of usage or 6 months. Air Filtration Unit Front View Turn anti-clockwise to open the cap.
Printer Maintenance - Touch Screen Remove the 2 screws on front plate. Open the front plate. FFC cable of LCD touch screen. Micro SD card of LCD touch screen.
Print Head Maintenance The printhead cover could be removed after unscrew 2 bolts. Heat up the nozzle to printing temperature by using the extrude function in maintenace interface. Nozzle could be removed by using the nozzle wrench provided. User does not need to remove printhead cover in order to remove nozzle.
Printer Maintenance - remove motherboard cover Remove the 2 screws on the mainboard cover.
ࡄϙ๗ᅁᬣАឭᰶ䭽ڙथ ౝ౭喟ࡄϙጯ䭠ࡧ䙿Іᶒ䌜⩟ तႼ⎽๔࣓ ბ ᓛԎ喟!݈䚤㥒 !UJFSUJNF ⊗ᓛࢇ喟!๗ᅁᬣА Mail:service@tiertime.net web:www.tiertime.com/www.up3d.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
