User's Manual

3.Operation
UP Plus 2 User Manual 51
Regularly check your nozzle height! It can change for a number of reasons, some of
which you may not even be aware of. To check your nozzle height, refer to section
3.3.2
To get the best results out of your Up printer, the print platform must be perfectly
lined up with the Nozzle. This means that when you set the nozzle height, it should be
exactly the same distance from the nozzle at all four corners, and the center, of the
print platform. If this is not the case, please follow the ―leveling the print platform‖
procedure listed in 3.3.3