User's Manual

4. Troubleshooting
UP Plus 2 User Manual 54
4. Install the latest UP! software.
5. Unplug the USB cable, then plug again. Windows will find a new device.
Manually select driver folder (Default is C:\Program files\UP\Driver or C:\Program
files(X86)\UP\Driver);
6. There should now be a new driver section in the device manager as shown below:
Option 2: Update the driver manually.
1. Install the latest UP software.
2. Find the ―3DPrint@FreeMC‖ driver in the ―Device Manager‖ dialog box (it should
be located in the USB section).