Users Manual Part 1

12
5.2 Auto Calibration
Auto Calibration can be triggered from the touchscreen, or from Wand software
when connected to a computer ( refer to page xxx). It consist of leveling of the build
plate and measurement of nozzle height. For more info please refer to page xxx.
Auto Calibration from Touchscreen
1. When the machine is switched on, user need to first run initialization in order to
operate the printer. Go to touchscreen press initialize button.
2. Click Calibration.
3. AUTO. The printer will start the process of calibration.
1. Initialize Printer
2. Press “Calibrate”
3. Press “Auto”
4.When Leveling procedure
finishes, the touchscreen will
ask the user to confirm nozzle
height value.
5. Put the nozzle height detector
under the nozzle.Adjust the + and -
button to make the nozzle just
touching the sensor pad
6. When the nozzle touch
the sensor it will emit a
buzz sound, press OK
button to save the value
OK