Users Manual Part 1
14
5. Go to touchscreen
1. Press Material
2. Press “Filament 1”Material
Button until it shows “PLA”,
then press “+” button to
increase material weight to
500g.
3. Press “ ” to extrude
material. The machine will heat
up and buzz when start to
extrude. It will stop
automatically
4. When the extruder start to extrude, push the
filament into entry 1 on extruder until it can be
feed by extrusion motor.
5. The filament should able to be extruded
from nozzle and form a clean straight thin
thread.