Users Manual Part 1

16
6. First Print
This chapter intends to guide new users to print a object with the Covergence Dual
extruder. Therefore as mentioned in the previous chapter the printer should be
loaded with PLA and Tiertime PVA support for dual material printing.
-For more info on the convergence dual please refer to page xxx
-UP300D can also use LT/HT Single Extruder for single material printing, for more
info on printing with single material, please refer to page xxx.
6.1. Slicing
1. Open UP Studio 3.
2. Turn on Extruder 2.
1. At Left column click the “gear”
icon to open the print setting menu.
2. Then click “Basic” button to switch to
“Advanced” mode.