Users Manual Part 1

17
3. Select “Extruder” Tab, Check the
“Extruder 2” Option, then select
filament “Tiertime PVA” for its filament
option. Then click “Apply” => “OK”
4. Go to top menu print settings, select the correct machine type and print
settings, eg Layer thick and nozzle diameter, the filament type for both extruders.
The left side material is filament 1(main material) select PLA, the right side material
(support) select Tiertime PVA.
3. Load a STL file by click the “+” button on the vertical menu.