Users Manual Part 1

20
6.2 Connect and Send Print Job to Printer
U300D supports USB, Wi-Fi, and Ethernet connection. For Connecting with WiFi or
Ethernet, please refer to page xxx.
USB Connection
Use the USB cable included, connect to one of your computers USB port and
UP300D’s back side USB port (Type-B).
Open UP Studio 3 on the computer, click the “ ” button (Print) to bring up the
“Wand” printer hosting module.
1. Click connect printer
2. Select the connected, click
“
Ok
”
3. Click “Print” to bring up task list.
4. Click “Print Task” to load the .TSK file that
just saved.
Once selected, the task file will be transferred to the printer. When data transfer is
finished, it will start to heat up and start printing after reaching adequate temperature.
As long as the data transfer is finished, user can disconnect the printer from
computer and printer will able to carry out the print job on its own.