Users Manual Part 1

23
7.1 Set Nozzle Height through Touchscreen, please refer to page xxx.
7.2 Setup Nozzle Height Value through Wand (computer hosted)
7.2.1 Connect printer to computer, open UP Studio 3.0 and click the “Print”
button to open “Wand”.
7.2.2 Click “Nozzle Height” button, the print head will move the position that is near
the platform.
7.2.3 Use the height detector included to confirm the nozzle height value.
User need to put the sensor pad of the detector under the nozzle and then use + / -
buttons to adjust the nozzle to touch the sensor until the sensor give a buzz sound.
When the nozzle height is determined by the sensor, click “Apply Height” to update
the nozzle height value.