Users Manual Part 1

7.3.1 Auto Matrix Leveling through touchscreen, refer to page xxxx.

7.3.2 Auto Matrix Leveling through Wand (computer hosted).

1. Connect printer to computer using USB/Wi-Fi cable.

2. In UP Studio click “Print” button to open “Wand”.

3. Click “Connect Printer”, the USB connected printer should in the available printer

list, click it to connect.

3. Click Initialize, and wait for the initialization process finishes

4. Click Level Calibrate.

5. Click Auto Leveling, the print head will then probe the platform in 9 positions. The

leveling probe will be lowered and start to probe nine positions on the platform. After

probing the platform, the leveling data will be updated and stored in the machine.

The leveling probe retracts automatically when the process is done.