Users Manual Part 1

31
Obtuse Angle, Z value will be negative.
Acute Angle, Z value will be positive.
In our case, for figure 4, the value of Z entered is -1.5 mm. For figure 5, it is 1.5 mm.
The H value is the measurement of the L-shape’s height between the bottom of the
ruler sitting on the L-shape’s base and top of the L-shape. Thoeratically, it is 40.0
mm, and the deviation on the height makes the value otherwise. Enter the height
measurement into the H value field.
In the end, do not forget to click the Confirm button to finish the process.