Users Manual Part 1

32
7.6 Dimensional Calibration
XYZ Axial Calibration is used to improve dimensional accuracy for a specific model.
When a printed object is found to be deviating from its theoretical dimensions, we
can use this method to correct it and achieve better precision.
To correct the dimensional error, go to Calibrate -> Model Calibration. Fill in the M1
column with the printed object’s actual values and enter the model’s correct values
into the S1 column.
Click Confirm. The software will save the values and adjust printing parameters to
correct for deviation.
Keep in mind, a calibration is only valid for the model used during the calibration
process. You may need to redo XYZ axial calibration for a different model in order to
achieve maximum dimensional accuracy.