Users Manual Part 1

40
Print Settings
Print Setting Mode:
Click the button to switch between Basic,
Advanced,Expert mode.
For Basic Mode, the print setting is similar to UP
Studio 2. The basic mode although limited but the
print settings are highly optimized, with quick
selection of basic print parameters, users will able to
get excellent print quality. If user is looking for a
simple and easy printing experience Basic mode is
the best choice.
For Advanced and Expert Mode, a lot more print
setting are opened up, users have much more
freedom on setting up print parameters but also has
bigger risk of adding errors that result in print failure
or defects.
After finish setting up the profile, click Apply to save
and click “OK” to leave current interface.
Parameters that highlighted in red are modified, once
click the apply button, the highlight will be removed.
Some parameters such as “Quality”(layer thickness)
are key settings that, when selected, will also pull
values to other parameters, such as path width. The
“pulled” parameters are recommend values, that give
users a foundation for modification.