Users Manual Part 1

7
2.2 What’s in the box
The Convergence dual extruder is installed on the UP300D.
1. Accessory box
One ABS Type single extruder
One USB Cable
One Pliers
One Scarper
One Nozzle Wrench: 8mm
One Nozzle Wrench: 10mm
One Pair of Gloves
One SD Card Reader
One SD Card
One Calibration Card
One Nozzle Height Detector
Two PTFE Tube: Shorter one for PLA Extruder; Longer one for TPU Extruder
Three Allen Keys: 2mm, 2.5mm, 3mm
Three Nozzles: 0.2mm, 0.4mm, 0.6mm
2. In the UP300DD box
One roll of 500g PLA Filament
One roll of 500g Water Soluble Support Filament
One Flex Glass Board
One Perf Glass Board
One Power Adapter
One Power Cord
Notice: All accessories may subject to change without prior notice. If anything is
missing, please contact your local distributor, or Tiertime’s global technical support
center, which can be reached via [e-mail]