Users Manual Part 2

56
7.6 Wi-Fi Connection
To connect your UP300D, you can set it up through UP Studio on your computer or
use the touchscreen on the UP300D.
Use the UP Studio on the computer:
1, Connect your UP300D with a USB cable to your computer,
2. Open UP Studio on your computer, go to Settings, choose Printer.
3. The connected UP300D will appeared with a green tick on top, click More (circled
in the red).
4, Click the down drop down menu, and then select the desired Wi-Fi network to
connect. You may be asked to enter the password of the Wi-Fi network.
You can make further changes for the Wi-Fi network by clicking Information icon.
5. You can now unplug the USB cable, and connect your computer to the Wi-Fi
network that you set for the UP300D.
6. Open UP Studio, go to Settings, click Printer, click Add Printer, find your UP300D
on the All Printer list, and click + to add your UP300D.