Users Manual Part 2

49
Platform Preheat
Preheat platform for max.15 minutes before printing
starts. Within 15 minutes, printing will start as soon as
target temp reach.
Sleep
De-initialize the printer when current print job finishs.
When De-initialized, the printer consume less power and
produce lower noise.
Printer
Printer Configuration
Manufacturer
Brand/Producer of printer
Model ID
Printer Model
Origin
X
N/A
X-coordinate for origin
Y
N/A
Y-coordinate for origin
Z
N/A
Z-coordinate for origin
Build Size
X
mm
X-axis range
Y
mm
Y-axis range
Z
mm
Z-axis range
Acceleration
Profile
mm/s
2
Acceleration for Perimeters
Infill
mm/s
2
Acceleration for Infill
Support
mm/s
2
Acceleration for Support
Jump
mm/s
2
Acceleration for non-printing movements
Extruder
Extruder 1
Filament
Choose material profiles, from Mat Lib
Nozzle Diameter
Select the nozzle diameter
Scale Factor
Extrusion Scale for the extruder (Result similar to E steps)
Entity ID
Input the entites assigned for this extruder
X Offset
Offset value for X axis, use for nozzle alignment for multiple
extruders
Y Offset
Offset value for Y axis, use for nozzle alignment for multiple
extruders
Z Offset
Offset value for Z axis, use for nozzle alignment for multiple
extruders
Switch Code
Gcode used for switching extruder
Extruder 2
Switch on/off extruder 2
Script
Print Start
Script insertion locations. User could insert Gcodes at these