Users Manual Part 2

52
Setting child profile is same setting of main profile. However some settings are not
available in child profiles, eg. Layer thickenss. Child profile allow user to adjust print
speed, temperature, extrusion scale, infill density, and etc for a particular vertical
section of the part
2. Optimize on X-Y plane
Use child model could allow user to optimize the part on another dimension.
1. Click “+” button add
child model.
a cylinder is added as a child model for the cube.
2. Select the type of child
model and define the
dimensions.
For the child model, user could define the property as union, subtract or select a
infill density.
Union: fuse child model
into the main model.
Subtract: child model is
subtracted from the main
model.
Infill: modify the infill
percentage of at the
overlapped region.
Support and Raft generation do not apply to child models.
15%
(main model)
100%
(
child model
)