Users Manual Part 2

:current axial coordinates.

3. X-Y axes

Control

Platform Map, click the squares to move the print head to

corresponding X-Y location on the platform. Red square( )

indicate current location

4. Z-axis

Control

Z axis indicator: black dot indicate current Z location of print head.

click to move print head long Z axis for a small distance

click to move the print head long Z axis continuous until

reach the end

5. Extruder

Settings

: current material setting use for the extruder

: current material weight left in spool that loaded to the

extruder

: current nozzle setting for the extruder

Maintenance

: click to initialize printer

: Setup nozzle height value

: Setup leveling of printer platform

: load a file to print

:Stop printer action immediately.

7. Printer Info