Users Manual Part 3

67
8.5 Config
Config section contains five parameters, and the Network Settings .
Name: it’s the printer’s name, you can change it on the
UP Studio software.
The default name is the printer’s S.N number.
Sound: Toggle the click sound while using touchscreen.
Preheat: Toggle the build plate preheating option. If it is
on, the machine will start pre-heating 15 minutes ahead
of the start of the print job.
You can read the introduction of Preheating in
Maintenance -> Preheat in the Software User Manual.
Private: Toggle the printer to set a password for private
use. Once this option is on, you can set a password for
your printer and your printer will not be accessible by
other users on the same network without obtaining the
password.
Password: The password for the printer to protect your printer from
other people’s access. Click the text field to enter your password.