Users Manual Part 3

61
Name
Icon
Description
Withdraw
To take out the filament inserted in the extruder unit with
the preset temperature.
Click the Withdraw icon. The up arrow on the button will
start moving upwards, indicating the extruder is heating up.
The extruder will start pushing the filament out once the
temperature reaches the melting temperature with a beep.
You now can remove the filament from the tip of the
extruder.
Click the STOP icon, the up/down arrow on the buttons will
stop moving. The printer should stop fully from extruding or
withdrawing the filament.
Material
Type
To change the material type.
Click the Material Type icon button to change the material
type.
Also, you can add customized types of material under
Maintenance in the software first, and then the new type
will be available on the touchscreen for you to select.
Default Settings:
The default material type is ABS.
The default material selection includes ABS, ABS+, PLA,
and TPU.
The button will show the current selected material type.
Material
Weight
To change the total weight the material remaining
manually.
Click Plus icon to increase the value or Subtract icon to
decrease the value. The value ranges from 0g- 9999g.
The material weight will be adjusted automatically based
on how much the material is consumed by print jobs.
Default Setting:
The default value of material weight is 500g.
Exit
Exit the Material section and go back to the main menu.