User's Manual

Windows 7 (SP1) or higher (64 bit only)

Mac OS 10.10 or higher

Hardware requirements:

Open GL 2.0

At least 4GB of RAM

Installation

Make sure you download the correct version of software based on your computer’s

configuration and follow the instructions of the installation program.

3.5 Update the Touchscreen Firmware

We regularly update the Tiertime 3D printer’s touchscreen program. It is important to

make sure your UP600’s touchscreen system is up-to-date before the first use and

pay attention to the upgrade announcement for touchscreen system in the future.

1. Download the UP600 Touchscreen Upgrade Program from

https://www.tiertime.com/touchscreen-upgrade-program/

2. Save the file to the root directory of the USBdrive which comes with the UP600,

and make sure the file is named as “UP600_x.x.x_update.tt” (Case sensitive), x.x.x

being the version number.

3. Insert the USB drive to the USB socket under the touch screen, and turn on the

printer. Wait until the printer is fully ready, go to Information Page, and press the

“Upgrade” button. Follow the instructions on the touchscreen afterwards.

4. Keep the USB drive handy for the future use.