User's Manual

4.2 Load Filaments

You will find one spool of500g Tiertime PLA for UP600

In order to archive good consistency and print quality, we recommend use Tiertime

filaments. The default print settings of UP Studio are optimized using Tiertime

materials, so you can start printing confidently without adjusting any parameters.

and follow the instructions of the installation program.

4.3 Update the Touchscreen Firmware

We regularly update the Tiertime 3D printer’s touchscreen program. It is important to

make sure your UP600/UP600D’s touchscreen system is up-to-date before the first

use and pay attention to the upgrade announcement for touchscreen system in the

future.

1. Download the UP600/UP600D Touchscreen Upgrade Program from

https://www.tiertime.com/touchscreen-upgrade-program/

2. Save the file to the root directory of the USBdrive which comes with the UP300D,

and make sure the file is named as “UP300D_x.x.x_update.tt” (Case sensitive), x.x.x

being the version number.

3. Turn on the printer and go to the Information Page of the touch screen. Insert the

USB drive to the USB port under the touchscreenand press the “Update” button.

Follow the instructions on the touchscreen to finish the update process. Remove the

USB drive once the update process finishes.