User's Manual

21
Chapter 5. First Print
This chapter intends to guide new users to print a object with use LT Single Extruder for
single material printing.
For print a object with the Covergence Dual extruder please refer to page xxx
5.1 Connect and Send Print Job to Printer
U600 supports USB, Wi-Fi, and Ethernet connection. For Connecting with WiFi or
Ethernet, please refer to page xxx.
USB Connection
Use the USB cable included, connect to one of
your computers USB port and UP600’s back side
USB port (Type-B).
Open UP Studio 3 on the computer, click the
“ ” button (Print) to bring up the “Wand” printer
hosting module.
1. Click connect printer
2. Select the connected, click “Ok”
3. Click “Print” to bring up task list.
4. Click “Print Task” to load the .TSK file that just
saved.