User's Manual

7.3.1 Auto Matrix Leveling through touchscreen, refer to page xxxx.

7.3.2 Auto Matrix Leveling through Wand (computer hosted).

1. Connect printer to computer using USB/Wi-Fi cable.

Find a USB cable, and connect one end to the computer and the other end to the

UP600 back USB port (type-B). Open the UP Studio on the computer, you will find

the connected UP600 listed in the available printer list of Wand.

1. In UP Studio click “Print” button to open “Wand”.

2. Click “Connect Printer”, the USB connected printer should in the available printer

list, click it to connect.

3. Click Initialize, and wait for the initialization process finishes

4. Click Level Calibrate.