User's Manual

52
Max. Radius
mm
Threshold for applying shrink compensation, holes larger than this diameter
value will be ignored.
Ratio
N/A
The bigger this value the more compensation for small holes
Max Shrink
N/A
Set max. Shrink ratio for compensation
Entity ID
Profile
different regions of a print, are marked with an entity ID, so that they can be assign
to different extruders to print. The entity IDs are used in the Extruder Settings.
Inner Profile
Top
Bottom
Infill
Support
Support Hatch
Raft
8.6.4 Speed
Profile
mm/s
Print speed of Perimeters
Inner Profiles
mm/s
Print speed of Inner Perimeters
Bottom and Top
mm/s
Print speed of Bottom and Top
Fill
mm/s
Print speed of Fill
Support
mm/s
Print speed of Support
Support Hatch
mm/s
Print speed of Support Fill
Jerk
?
Print speed of Short path
Jerk Length
mm
Define Max. Length of short path
Raft
mm/s
Print speed of raft layers
Raft Base
mm/s
Print speed of first layer of raft
Jump
mm/s
Speed of jumps (non- printing movements of extruder)
8.6.5 Temperature
Temperature Tune
Profile Tune
℃
Set increase/decrease of nozzle temperature when printing Perimeters
Infill Tune
℃
Set increase/decrease of nozzle temperature when printing Infill
Support Tune
℃
Set increase/decrease of nozzle temperature when printing Support
Raft Tune
℃
Set increase/decrease of nozzle temperature when printing Raft
Support Peel
Bond Strength
%
Define the bond strength between part and support.
Extrude Scale
Profile
N/A
Extrusion scale of perimeter, value larger than 1 means increasing extrusion
amount, value smaller than 1 means reducing extrusion.
Inner Profile
N/A
Set extrusion scale of inner profile
Top
N/A
Set extrusion scale of top layer
Bottom
N/A
Set extrusion scale of bottom layers
Support
N/A
Set extrusion scale of support
Jerk
N/A
Set extrusion scale of short paths
Raft
N/A
Set extrusion scale of raft
Raft Base
N/A
Set extrusion scale of first layer of raft