User's Manual

53
8.6.6 Seams Settings
Start Optimize
Layer Start
Preference for layer start point
Fixed Start X
Define start point on X coordinate.
Fixed Start Y
Define start point on Y coordinate.
Profile Start
Preference of Start base perimeter features
Join Size
%
Size of join
Join Extend
mm
How much the join extend and reach into infill area.
Join Cross
Whether make the join to cross-path
Infill dog
Speed Down
Slowest Speed
mm/
s
Define slowest speed for short perimeter
Short Profile
mm/
s
Define length of short perimeter for applying speed down
Min. Layer Time
s
Define the minimum duration a layer must spend. Ensure enough cooling
time for part.
Firsts Layer Speed
%
Speed down percentage for the 1
st
layer. Slow down for first
layer could improve layer adhesion to platform, increase print
success rate.
Other Options
Platform Preheat
Preheat platform for max.15 minutes before printing starts. Within 15
minutes, printing will start as soon as target temp reach.
Sleep
De-initialize the printer when current print job finishs. When De-initialized,
the printer consume less power and produce lower noise.
8.6.6 Printer
Printer Configuration
Manufacturer
Brand/Producer of printer
Model ID
Printer Model
Origin
X
N/A
X-coordinate for origin
Y
N/A
Y-coordinate for origin
Z
N/A
Z-coordinate for origin
Build Size
X
mm
X-axis range
Y
mm
Y-axis range
Z
mm
Z-axis range
Acceleration
Profile
mm/s
2
Acceleration for Perimeters
Infill
mm/s
2
Acceleration for Infill
Support
mm/s
2
Acceleration for Support
Jump
mm/s
2
Acceleration for non-printing movements
8.6.7 Extruder