User's Manual

54
Extruder 1
Filament
Choose material profiles, from Mat Lib
Nozzle Diameter
Select the nozzle diameter
Scale Factor
Extrusion Scale for the extruder (Result similar to E steps)
Entity ID
Input the entites assigned for this extruder
X Offset
Offset value for X axis, use for nozzle alignment for multiple extruders
Y Offset
Offset value for Y axis, use for nozzle alignment for multiple extruders
Z Offset
Offset value for Z axis, use for nozzle alignment for multiple extruders
Switch Code
Gcode used for switching extruder
Extruder 2
Switch on/off extruder 2
8.6.8 Script
Print Start
Script insertion locations. User could insert Gcodes at these location
for customized functions. Accepted Gcodes:
G0: linear Move
G1: fast linear move
G4: Dwell
G28: Move to Origin (Home)
G90: Set to Absolute Positioning
G91: Set to Relative Positioning
G92: Set Position, only support A axis reset.
M0: Stop or Unconditional stop
M1: Sleep or Conditional stop
M2: Program End
M25: Pause SD print
M42: Switch I/O pin;eg.M42 P15 S0 or S1,port 15,s0=off,s1=on
M73: Set build percentage
M80: ATX Power On
M81: ATX Power Off
M82: Set extruder to absolute mode
M83: Set extruder to relative mode
M92: Set axis_steps_per_unit
M104: Set Extruder Temperature
M109: Set Extruder Temperature and Wait, Example M109 S215
M140: Set Bed Temperature (Fast)
M141: Set Chamber Temperature (Fast)
M190: Wait for bed temperature to reach target temp
M191: Wait for chamber temperature to reach target temp
M204: Set default acceleration
M206: Offset axes
Print End
Layer Start
Layer End
Profile Start
Profile End
Infill Start
Infill End
Support Start
Support End
Path Start
Path End