User's Manual

7.4 Wi-Fi Connection

1, Connect your UP300D with a USB cable to your computer,

2. Open Wand module on your computer and connect to printer.

3. Double click the name of the printer on the printer list on top. This will bring up a

network setting window.

At the WLAN drop down menu, choose the WiFi

network to connect.

Then enter the password for the network. You

can now unplug the USB cable, and connect

your computer to the Wi-Fi network that you set

for theUP300D.

7.5 Ethernet Connection

Plug in an ethernet cable into the LAN port on the back ofUP300D, when connection

is established,a LAN icon will appear on the touchscreen.

7.6 Editing Network Configuration

When connected to a network, click the edit button will bring the detail network

setting page. Use may edit the settings here to suit their network requirements.