User's Manual

67
Pause
Pause the on-going print job.
Resume
Resume the paused print job.
Stop
The printer will stop the print job completely.
Extrude
To extrude the inserted filament.
Withdraw
To withdraw the inserted filament.
12.5 Calibrate
The nozzle height of a printer is a key parameter that needs properly set before any
print jobs. It can be calibrated manually or set automatically.
Click Auto on the touchscreen, the printer
will go through a mechanical process to detect
the nozzle height. The final nozzle height will
appear on the screen after the whole process
finishes:
Nozzle Height
6xx.xx mm
The actual nozzle height value.
Live nozzle Height
Indicating the present nozzle height.
Using +/- to adjust the nozzle height manually.
Edit
To edit the nozzle height by inputing numbers
manually.
Exit
Exit Calibration section and back to main menu.
20.0 m m
E d it