Parts List

of the nozzle, without bubbles or tangling as
the extrusion goes on
Stop
To stop the printer in the middle of an
extruding or withdrawing process.
Click the STOP icon, the up/down arrow on
the buttons will stop moving. The printer
should stop fully from extruding or withdrawing
the filament.
Material
Type
To change the material type.
Click the Material Type icon button to change
the material type.
Also, you can add customized types of
material under Maintenance in the software
first, and then the new type will be available on
the touchscreen for you to select.
Default Settings: The default material type is
ABS. The default material selection includes
ABS, ABS+, PLA, and TPU. The button will
show the current selected material type.
Material
Weight
To change the total weight the material
remaining manually.
Click Plus icon to increase the value or
Subtract icon to decrease the value. The
value ranges from 0g- 9999g.
The material weight will be adjusted
automatically based on how much the material
is consumed by print jobs
Default Setting: The default value of material
weight is 500g.
Exit
Exit the Material section and back back to the
main menu
5.3 Print
In the Print section, you can start a print job or manage the print jobs that
currently in the print queue or have finished.