User's Manual

WatchKEY USB Token User manual
Watchdata Technologies Pte Ltd
Admirax 8 Admiralty Street #02‐07/08,
Singapore 757438
www.watchdata.com
API & standards support
PKCS#11 v2.01,
Microsoft CAPI 2.0,
PC/SC,
X.509 v3 certificate
SSL v3,
Memory Size
64K
On board security algorithms
RSA 1024‐bit and 2048‐bit,
DES, 3DES (Triple DES), MAC , AES
SHA‐1, SHA‐256
Security certifications
smart card chip: FIPS 140‐2
ISO specification support
Support for ISO 7816‐1 to 4 ,8/9 specifications
Operating temperature
0° C to 70° C (32° F to 158° F)
Storage temperature
‐40° C to 85° C (‐40° F to 185° F)
Humidity rating
0‐100% without condensation
Connector
USB type A; supports USB 1.1 and 2.0 (full speed and high
speed)
Memory data retention
At least 10 years
Memory cell rewrites
At least 500,000
Weight and Size
Approx. 8g , 78mm*23mm*9mm
2. WatchSAFE ND 3.4 Installation
AutoRun supported ND (No Driver) USBKey integrated installation program inside itself. In OS
(Operating System) which allows CD automatic running, the installation of management tool will
automatically run when USBKey plugged in.
For other ND USBKey, a management tool installation from CD is needed. In this chapter, the
installation and uninstall of WatchSAFE ND 3.4 will be illustrated.
2.1 Install WatchSAFE ND 3.4
At the first time of plugging in ND USBKey, the auto‐run supported product will automatically
install certificate management tool in the OS which allows CD automatic running. For using other
USBKeys, it is necessary to install the tool from CD at first.
Installation process:
At the first time of inserting USBKey, an installation window like figure 2.1.1 will pop out. In a few
seconds, you will find a window displaying successfully installed.