Beijing Winner Microelectronics Co., Ltd. IOT3S Wi-Fi Module Specification V1.0.1 Beijing Winner Microelectronics Co., Ltd. (winner micro) th Address: 18 Floor, Yindu Building, No.67 Fucheng Road, Haidian District, Beijing, China Tel: +86-10-62161900 Website: www.winnermicro.
Beijing Winner Microelectronics Co., Ltd. Document History Version Complete Date V1.0.0 2018-11-13 Revision Record Initial Release Autor Auditor Linda Ray Kevin Ray 1. Modify power consumption with V1.0.1 2019-02-28 new version SDK 2.
Beijing Winner Microelectronics Co., Ltd. Content 1 Introduction .................................................................................................................................................. 1 2 Product Features ........................................................................................................................................... 1 2.1 Interface .......................................................................................................................
Beijing Winner Microelectronics Co., Ltd. 1 Introduction IOT3S is the Wi-Fi module based on IoT Wi-Fi SoC W600. It integrates stamp hole interface and PCB antenna. This Wi-Fi module can be used for smart appliance, smart home, smart toy and industry field. 2 2.1 2.2 Product Features Interface ➢ Stamp hole interface with 2.
Beijing Winner Microelectronics Co., Ltd. 2.3 3 Others ➢ Support programmabel GPIO control ➢ Support AT+command protocol based on ASCII code with UART interface ➢ Support multiple network protocols: TCP/UDP/ICMP/DHCP/DNS/HTTP ➢ Support DHCP Server, DNS Server ➢ Support extensible WEB server ➢ Support firmware online update Product Specification Table 3-1 Specification List Item Wi-Fi Mode RF Impedance SWR Frequency Range Parameter IEEE802.11b/g/n 50Ω <-10dB 2.4~2.
Beijing Winner Microelectronics Co., Ltd.
Beijing Winner Microelectronics Co., Ltd. Table 4-1 PIN Description 5 No. Name Type Default Function Reuse Function 1 RESET I RESET with low level 2 NC 3 NC 4 PB_13 I/O PWM_2 I²C_SCL, GPIOPB_13 5 PB_14 I/O H_SPI_INT I²C_DAT, GPIOPB_14 6 PB_15 I/O H_SPI_CS PWM_4, GPIOPB_15 7 PB_16 I/O H_SPI_CK PWM_3, GPIOPB_16 8 VDD P Power supply with 3.
FCC WARNING FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.