Owner manual

Important Information
LCD display panels are manufactured using an extremely high level of precision technology, however
sometimes some parts of the screen may be missing picture elements or have luminous spots. This is
not a sign of a malfunction.
Cleaning the screen and the cabinet...
After turning off the power, clean the screen and the cabinet with a soft, dry cloth. We recommend that
you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
Dispasal...
The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury, when the set
reaches the end of its useful life please dispose of it in accordance with Local Government Regulations
or at a recycling centre.
Connection of Mains Cable
Always use the mains cable supplied. First of all insert the mains cable into the input panel of the CTV,
and only there after in to mains supply socket.
ELECTRICAL CONNECTIONS
For your own safely read the following instructions carefully before attempting to connect this unit to
the mains supply.
IMPORTANT appliance may not correspond with the coloured
The wires in the mains lead are markings identifying the terminals in your plug, proceed
coloured in accordance with the as follows;
foiiowing code; The wire which is coloured blue or black must be
Blue - Neutral connected to the terminal which is marked with the letter
Brown - Live N or coloured Black.
As the colours in the mains lead of this The wire which is coloured brown or red must be
connected to the terminal which is marked with the letter
L or coloured Red.
BLUE / ^OWN
(Neutral) (Live)
No connection is to be made to the Earth terminal of the
plug.
If a 13 Amp (BS1363) Plug is used, fit an ASTA
approved 3, 5, or 13 Amp fuse as required.
If your product is fitted with a moulded plug Vi/hich
requires replacement ptease cut off and dispose of
safely, then rewire as shown above.
IMPORTANT
The wires in the mains lead are coloured
irt accordance with the following code;
Blue - Neutral
Brown - Live
Yetlow/Green -• Earth
As the colours in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows;
The wire which is coloured green and yellow must
be connected to the terminal which is marked with
the letter E, or by the earth symbol, or coloured
green or green and yellow.
The wire which is coloured blue or black must be
connected to the terminal which is marked with the
letter N or coloured Black.
The wire which is coloured brown or red must be
connected to the terminal which is marked with the
letter L or coloured Red.
If a 13 Amp (BS1363) Plug is used, fit an ASTA
approved 3, 5. or 13 Amp fuse as required,
if your product is fitted with a moulded plug which
requires replacement please cut off and dispose of
safely, then rewire as shown above.
Caution: -Under no circumstances should the discarded plug be inserted into a mains socket. To
prevent shock hazard carefully dispose of the discarded plug into your dustbin, do not leave the plug
lying around where children might see it.
-4-