INTEGRATED DIGITAL HD READY COLOUR TELEVISIONS 40WLU530HID Operating Instructions
TABLE OF CONTENTS 1.Important Information ...............................................................1 1.1-Cleaning the screen and cabinet... .......................................................1 1.2-Disposing of your TV at the end of service life... ...................................1 1.3-Superior features of your integrated digital television ............................1 1.4-Receiving digital broadcasting channels ...............................................1 1.5-Changing the plug............
1 Important Information LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use patented polishes or solvents on the screen or cabinet since they may cause damage. 1.2-Disposing of your TV at the end of service life...
1.5-Changing the plug The supplied mains cable already has a mains plug fitted, however should you need to replace it at any time please refer to the appropriatte wiring information below for your particular cable.
2 Features of your new television Thank you for buying this television which is designed to give you many years of satisfactory service. You may already be familiar with using a television but do please take time to read these instructions. They are designed to familiarise you with the tv’s many new features and to ensure you get the vary best out of your purchase. 2.
3 Important Safety Instructions This symbol is used to warn the user about the “dangerous voltage” contained inside the TV that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV. 1) Please READ the operating instructions before using the TV for the first time. 2) Please observe the instructions contained in the Operating Instructions. 3) Please consider all warnings.
10) Never operate your TV close to water. Operating your TV, for example, near a bathtub, washbasin, wet basement and swimming pool can cause fire or electric shock. • • Note: Do not use defective sockets. Make sure that the plug is firmly inserted into the socket. If the plug remains loose, then it can cause fire due to arcing. Refer to an electrician to have your socket replaced.
18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning. Unplug the AC mains lead from the socket when cleaning the TV. Otherwise, there is the risk of electric shock. Note 1: This is a Class A product. During operation, the TV can cause radio interference. In this case the user may have to remedy this.
4 Start Note1:Your TV does not have a seperate on/off switch, therefore to switch the power completely off (i.e. not on standby), switch off or unplug the TV at the mains socket. Note2: Your TV is equipped to operate with TV buttons in case your R/C is broken or the batteries are exhausted. 3. Press the power on/off button located on the LCD TV. 4. To power on your television, press any numerical key or PR+ or PR- keys on the remote control. For this process, you can also use the buttons on your TV.
5 Your new television 5.1-TV Control Panel Program Down/Up button or or or or Stand by indicator Menu button / Source selection button or Volume Level Down/Up button Bright light: TV is in Stand-by Dimmed light: TV is On No light: Power Cable is not connected. or On-Off / Standby button 5.
5.
6 Performing the initial power-on settings 6.1-TV controls 6.1.4-Performing the Volume setting You can adjust the volume of your television by using the VOL+/VOLbuttons on your remote control. 6.1.1-Temporary on/off (STAND-BY) When you press the red STANDBY button located on the upper left hand side of your remote control while your television is switched on, the sound and the picture will go off. In the stand-by mode, the power indicator of your television will glow brighter.
6.2-Turning on the TV and Setting the Channels SETUP AUTO TUNING MANUAL TUNING FIRST TIME INSTALLATION When you turn on your television for the first time, FIRST TIME INSTALLATION CHECK AERIAL CABLE IS CONNECTED. PRESS OK KEY TO CONTINUE message is displayed. If the aerial connections are correct, press OK button to continue. COUNTRY SELECTION menu will be displayed. Select the country by using Up/Down, Left/Right movement buttons and press OK button to start the auto programming.
6.3.2-Manual tuning of channels and storing in the memory Add Channels : With this option, the new channels in the frequency which is desired to be manually searched will be scanned and added to the existing channel list. Replace Channels : With this option, you can update the existing channel list with the modifications made by the broadcaster.
6.3.3.1-Displaying Television and Radio channel lists and selecting the channels Note: You can also access the Favourite Lists menu from the scroll down menu of Digital Features menu. 6.3.4-Electronic TV Guide (EPG) When the program table menu is opened, all TV and radio channels stored in the list are displayed. You can navigate between the channels with Up/Down, Left/ Right movement buttons or you can select any channel you wish by pressing the OK button.
6.3.5-Digital Features Access Control Lock/Unlock Channels Change PIN To enter digital features menu, select FEATURES tab from the main menu by using Up/Down movement buttons. Select DIGITAL FEATURES tab from FEATURES menu by using Up/Down movement buttons and press OK button to confirm. DIGITAL FEATURES menu will be displayed. Select Digital Features Lock/Unlock Channels: Select Lock/ Unlock Channels tabs from Access Control menu and press OK button to confirm.
6.3.5.5-Favourite Lists Analogue mode. Press the MENU button on your remote control. Select SETUP tab with Down movement button and confirm with OK button. Setup menu is displayed. Select PROGRAM NO tab by pressing the Up/Down movement buttons in Setup menu, enter the channel number to be searched and stored automatically, then select AUTOPROGRAM tab by using the Up/Down movement buttons and press OK button; Country Selection menu will be displayed. Please see 6.3.3.
6.4.2-Manual tuning of channels and storing in the memory 6.4.2.1-If you already know the channel number (See page 31) 6.4.2.2-If you do not know the channel number Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and confirm your selection with the OK button. Setup menu will be displayed. Select the system in which you would like to make the search from the SYSTEM tab. Move into CHANNEL tab by pressing the Down movement button.
after this program number. After setting is complete, press the EXIT button to exit the menu. 6.4.4-Program Table Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed. 6.4.4.3-Skipping a stored channel In the event that you do not wish to see certain programs while navigating through the channels using the PR+/PR- buttons, then you can use this function.
7 Settings of Your New Television sound of the program. Options in the SRS menu become active when the SRS function is selected. Note: SRS menu will not be active if the SRS is not selected from the Sound mode tab. 7.1- Sound Menu Settings You may perform volume settings by using the VOL+ or VOLbuttons on your television or the VOL+/VOL- buttons on your remote control. You can perform other Sound settings by entering the Sound menu. For this, press the MENU button on your remote control.
EQUALIZER TruBass ON Dialog Clarity ON CHANGE MUSIC SPORTS CINEMA SPEECH USER MENU CHANGE BACK MENU BACK 7.1.8-Dynamic Bass (optional) Dynamic Bass, makes the bass content of the music clearer throughout the volume level range. When the volume is set to a lower level, bass frequencies at the lower end generally disappears. Dynamic Bass feature, that reinforces the bass levels can be used to avoid this. 7.1.6.
7.2.2-DNR (Noise reduction) (Optional) Down movement buttons to activate this feature and select one of the OFF, LOW, MID or HIGH options with Right/Left movement buttons. You may reduce interference and noise formed in the picture by using this feature. Select DNR tab in the Picture menu with the Up/Down movement buttons to activate this feature and select one of the OFF, LOW, MID, HIGH or AUTO options with Left/ Right movement buttons.
7.2.9.2-16:9 7.2.9.7-Panorama (Optional) Please use this setting for watching wide screen DVDs, wide screen video cassette or 16:9 formatted broadcasts. Since various screen formats such as 16:9, 14:9 and etc. are used, black stripes might be formed on the lower and upper parts of the screen. This setting will enlarge the image to fit the screen by stretching the image horizontally while holding the correct proportions at the centre of the image. Some distortion may occur.
can eliminate the need for a power source. For best results it is recommended to use an outdoor aerial. TIMER CLOCK ON TIME OFF TIME ON TIMER LIST PROGRAM NO --:---:---:-ANALOG P01 7.4-Other picture features 7.4.1-Zoom CHANGE MENU Press the ZOOM button on your remote control while watching a channel to activate this feature. During the zooming process, the image is zoomed in in three stages oriented to the centre.
7.4.4-PAT Mode Note 2: Since the external sources such as satellite receivers focus on single channel and transmit it to the TV although they can receive many channels, other channels that are received by similar devices can not be displayed on the POP screen. Note 3: HDMI2 can not be selected in the PIP screen when HDMI1 is displayed on the main screen. Note 4: Right and left movement buttons do not control the volume in PIP, PAP and PAT modes. They can only be used to change the source.
8 Teletext (A nalogue) 8.3-Teletext image in the TV picture (MIX) Teletext means in short the transmission of various updated information along with the TV broadcast signal in the form of text and graphics. To be able to receive a quality teletext broadcast, a good aerial system and a broadcast signal that is not weak, with no reflections and interference from other channels are required. Even in a very clear reception, it is normal for some characters or tabs to be lost.
8.7-Temporary TV Picture (UPDATE) Note: The fastext feature is not available for all teletext broadcasts. It is determined by the broadcaster whether it is to be broadcast or not. This button allows you to switch to the television picture while the page you want is being searched in the teletext broadcast eliminating the need to wait during the search. You may switch to the television picture by pressing the ( ) button while Teletext is searching for your desired page.
9 External equipment connection HDMI 2: To be able to watch the image when a connection is made via the HDMI 2 socket, this option must be selected. You can connect various compatible audio and video devices to your television. AV inputs: Press the AV button on your remote control. The Source menu, where you can select the access mode will be displayed. Here, you can select whichever input you would like.
9.1-Connection types for external devices SCART SOCKET VCR/VCD Your TV is equipped with 10 inputs including aerial input, which allows for the external device connection. These inputs are: DVD/PVR 1-Aerial input 2-SCART 1 input 3-SCART 2 input 4-SCART 2S input 5-AV (PHONO) input 6-S VIDEO input 7-PC input 8-HDMI 1 input 9-HDMI 2 input 10-YUV Component input DECODER CAMCORDER You can connect your external device supporting the suitable inputs to your TV via these inputs.
9.2.3-PC Setting Note 1: 4:3, 16:9 and 14:9 picture formats are supported in 16:9 panels. Only 4:3 picture format is supported in 4:3 panels. Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC mode. In order to make the necessary settings in this menu, you can use the rightleft, up-down movement buttons on your remote control. You can make the following settings for your monitor in this menu.
10 Help and tips Failure Possible cause Solution The television does not function Is the mains lead connected to the mains supply and the TV? Is the main power socket switched on? Check the mains lead Is the aerial cable attached? Check the aerial cable. If you are using a satellite dish, is it well adjusted? Have the dish adjusted. Aerial may be affected by connected external devices. Try disconnecting one of the devices. It may need fine tuning. Perform fine tuning.
11 Technical specifications chart SCREEN SIZE Panel type Sound output 40” 40”, 16:9 Active matrix TFT 2 x 10 W Power consumption 240 W Stand by power value <2.
12 MAIN UK TRANSMITTER STATIONS Regional Main stations North West Caldbeck Winter Hill Douglas (IOM) North Belmont Emley Moor North East Bilsdale West Moor Chalton Pontop Pike Midlands (West) Ridge Hill Sutton Coldfield The Wreckin Mindlands (East) Waltham South West Beacon Hill Caradon Hill Huntshaw Cross Redruth Stockland Hill Channel Islands Fremont Point West Mendip South Hannington Midhurst Rowbridge UHF CHANNELS BBCI BBC2 ITV CH4 CH5 30 55 68 34 62 66 28 59 48 32 65 56 56 48 56 12 15 45 22
Plc 13 Guarantee - Television Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • All repairs necessary as a result of faulty materials,defective components or manufacturing detect. • The cost of all functional replacement parts,excluding remote control batteries • The labour costs of a Beko approved repairer to carry out the repair • You may be offered a replacement instead of repair under guarantee.
Plc 13 HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television.Your new television has been designed and manufactured to the highest quality stadards to give you many years of use.To get the best out of it,please take a few moments to read the instruction book. Your television is supplied with a full 12 months guarantee,covering parts and labour.
FAZ.