D 5102 B D 5101 B D 5102 BS D 5082 B D 5081 B D 5062 B D 5081 BS D 5061 B Washing Machine User’s Manual
Dear Customer, We wish that this product, manufactured at modern facilities with total quality notions, will deliver you the best performance. In order to guarantee this, please read this instruction manual thoroughly and keep it for your future reference.
Contents 1 Technical Features of Your Washing Machine 5 2 Warning 7 3 Preparation 9 4 Program Selection and Starting Machine 13 5 Care and maintanence 18 6 Installation 20 7 Helpful tips on stain removal 23 8 Before calling service 24 4
1 Technical Features of Your Washing Machine D 5102 B D 5102 BS D 5101 B D 5082 B D 5081 B D 5081 BS D 5061 B D 5062 B Maximum dry laundry capacity (kg.) 5 5 5 Height (cm.) 85 85 85 Witdh (cm.) 60 60 60 Depth (cm.) 54 54 54 Net Weight (kg.) 64 64 64 Electricity (V/Hz.
Your Washing Machine 1 2 5 3 6 4 6 1 Top Lid 2 Front Panel 3 Handle 4 Kick Plate Cover 5 Front door 6 Kick Plate
2 Warning • This product is designed for home use. • Your washing machine is adjusted to 220V. • If the fuse in your house is less than 16A than have a certified electrician deploy an 16A fuse. • • • • • • • In case of transformer or non-transformer use, grounding installation must be performed with a licensed electrician. Any use before grounding is not our responsibility. Never place your machine over a carpet covered floor. Otherwise electrical parts of your machine may overheat.
• • • again. If “washing” led on program progress display is blinking either there is no water or tap is off. Check your taps. Turn your machine off and on. If the problem persists unplug your machine, turn off tap water and call authorized service. If program is started or program selection can not be performed your machine might be in protection mode due to infrastructure problem (voltage, water pressure, etc.
3 Preparation Before starting your machine please beware of below mentioned points: Opening Front door Pull the handle to open the front door. Your machine’s front door is designed for opening during only machine is not operating. If the led displays “ready” than door can open. Did you plug the cable? Did you connect draining hose correctly? Did you close front door? Did you open tap water? Loading machine with laundry Fill the machine by unfolding and not squeezing laundry.
a. Compartment I, powder detergent drawer for pre-wash. b. Compartment II, powder detergent drawer for main wash. c. Siphon d. Softener drawer Fill the softener as indicated (usually <100ml; 1 tea bag) on package. Never fill more than “MAX” level. Excess amount will drain to suction cup and be wasted. You might need to fill softener again. If softener is thickened over time add some water for thinning. Softener may obstruct suction cup and block flow.
Control Panel 2 1 8 7 6 3 4 5 1- Program progress display 2- Time delay selection button 3- Time display 4- Program selection knob 5- Anti-creasing 6- Rinse Plus 7- Quick Wash 8- On/Off button 11
Additional Functions Quick wash Shortens washing time for lightly soiled fabrics. This function can be used for cotton and synthetic programs for temperatures below 60°C. Rinse plus By using this function your machine will add another rinse process to the three rinse processes that it has already done. This additional rinse will reduce any affects on sensitive skin by washing leftover detergent. Anti- creasing To avoid wrinkling of your clothes, select this function.
4 Program Selection and Starting Machine Plug you machine to outlet. Turn on the machine by pressing “On/Off” key. Open the door by pulling the handle and load the machine without exceeding loading capacity and close the door. Specify the appropriate program by looking at program selection table according to type of laundry, degree of soiledness and washing temperature. Position program selection key to desired washing program-temperature. Select convenient spin cycle related to selected program.
Program selection table Program Program Type of laundry Max Load Program Du(kg) ration (min) Water ConEnergy ConQuick Rinse Antisumption (lt) sumption (kWh) wash Hold Creasing Prewash + Cotton 90 Heavy soiled Durable fabrics made of cotton and linen 5 160 65 2.50 Cotton 90 Heavy soiled Durable fabrics made of cotton and linen 5 150 55 2.40 Cotton 60 Normal soiled cotton and linen durable to heat 5 130 49 1.10 Cotton 40 Less soiled cotton and linen sensitive to heat 5 125 49 0.
Pressing “On/Off” By pressing “On/Off” key you can make your machine ready for selecting program. When “On/Off” key is pressed “Ready” led will displayed meaning “door can open”. Press “On/Off” key again for turning your machine off. Pressing “On/Off” does not mean program started operation. You must press “Start/Pause/Cancel” for starting the program. Function Selection Additional functions selectable according to selected program can be selected by pressing related key.
case “Start/Pause/Cancel” led will blink. Pause/Cancel” key for continuing program. Changing Program Time delay for program start You can use this feature for washing laundry in the same textile group for washing at lower or higher temperatures. For example, instead of Cotton60, Cotton40 can be used. For selecting Cotton40 instead of Cotton60 by pressing “Start/Pause/Cancel” key machine is switched to pause position. Program knob is turned for selecting Cotton40 program.
If cancel task is performed during washing “Spin led on display will go on, machine pumps and when “Spin” led is off “Ready led will be on, door can be opened and new program can be selected. Even program selection button is changed during the program initially selected program will be executed.
55 Care and maintanence Detergent Drawer be when they are soiled. For doing this, turn off tap water. Pull out water inlet hoses. Clean top of water inlet valve filter with a brush. If filters are extremely soiled you can pull it out with a pincer. You can take out flat side of water inlet hoses with its seal and clean with tap water. (2 filters in Single water inlet machines, 4 filters in double water inlet machines) Powder detergent residue may accumulate in drawer after a while.
Cleaning Pump Filter There is filter system maintaning long lifetime of pump by blocking foreign objects like button, cloth fiber enter to the pump during drain of washing water. It is useful to clean the filter when it is soiled. In order to this: Unplug your machine. Open the filter at bottom right corner by pressing marked space on the lid. Hot water risk: There might be 15 lt., 90°C hot water in the drum. Open the filter carefully. Caution! If the filter and hose tap does not fit, it leaks water.
6 Installation 2. Leveling the feet If your system is not ready, let a certified plumber make it ready. Or order to operate your machine without noise and vibration it must be properly on balance. Four feet of your machine can be adjusted. First loosen plastic counter bolt. Tighten the counter bolt after adjusting the feet for leveling your machine. 1. Removing the transportation locks Before the washing machine is operated, the transit bars must be removed! In order to do this: 1.
Connection points are below water pressure there turn on tap water after connection. Check all connections for leaks In order to eliminate any risk due to water leakage keep the taps off when machine is not used. Do not connect single inlet machine to hot water. If machine is connected with Y part to a double inlet and over 40˚C for single inlet machines, machine may switch to protection mode. b) Water drain hose Your machine will operate efficiently if the water from tap is minimum 1 and maximum 10 bars.
4. Electrical connection Connect the power cord to the appropirate electrical system which is being supported by the maximum voltage and current rating indicated on the rating plate placed inside the kick plate. Look! Page 1, Steps before operating Fullautomatic Washing Machine and safety precautions. Make sure that you have grounded power outlet. Attention! Before any operation of the machine check the following.
7 Helpful tips on stain removal The following � fabric manufacturer. Alcoholic baverages: Wipe the fabric first with water, then water-glycerine solution and rinse with vinegar-water solution. Blood stain: Leave the fabric for30 minutes in the cold water. Use ammonia solution to remove the stain. (4 liters water3 spoonful of ammonia.) Shoe polish: Without harming the fabric, remove the stain carefully and grind it with detergent.
8 Before calling service Water coming from beneath the machine. Check the water intake and drain hoses. Tighten the connections. The washers of the hoses may be worn out. If non of the both, the pump filter is not closed properly. You turned the machine on, but the leds are off on the panel. Check the grounding on the power cable or a blown fuse. Check the front door proper closure. Foam coming out of the detergent dispenser. Check whether your detergent is suitable for automatic machines.
