Built-In Hob BCT601IG
Please read this user manual first! Dear Customer, Thank you for purchasing this Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well.
TABLE OF CONTENTS 1 Important instructions and warnings for safety and environment 4 General safety ....................................................... 4 Electrical safety ..................................................... 4 Product safety ....................................................... 5 Intended use ......................................................... 6 Safety for children.................................................. 6 Disposing of the old product ................................
1 Important instructions and warnings for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.
maintenance, cleaning and repairing procedures. • If the power connection cable for the product is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. • The appliance must be installed so that it can be completely disconnected from the mains supply. The separation must be provided by a switch built into the fixed electrical installation, according to construction regulations.
• WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. • In case of hotplate glass breakage : Immediately shut off all burners and any electrical heating element and isolate the appliance from the power supply. Do not touch the appliance surface. Do not use the appliance. • After use, switch off the hob element by its control and do not rely on the pan detector.
children. Please dispose of all parts of the packaging according to environmental standards. • Electrical products are dangerous to children. Keep children away from the product when it is operating and do not allow them to play with the product. • Do not place any items above the appliance that children may reach for. end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment.
2 General information Overview 1 2 3 Induction cooking plate Assembly clamp Vitroceramic surface 4 5 Base cover Induction cooking plate Technical specifications Voltage / frequency Total power consumption Fuse Cable type / section External dimensions (height / width / depth) Installation dimensions (width / depth) Burners Rear left Dimension Power Front left Dimension Power Front right Dimension Power Rear right Dimension Power Technical specifications may be changed without prior notice to improve the
3 Installation Product must be installed by a qualified person in accordance with the regulations in force. The manufacturer shall not be held responsible for damages arising from procedures carried out by unauthorized persons which may also void the warranty. Preparation of location and electrical installation for the product is under customer’s responsibility. DANGER: The product must be installed in accordance with all local electrical regulations.
Installation and connection • The product must be installed in accordance with all local electrical regulations. Do not install the hob on places with sharp edges or corners. There is the risk of breaking for glass ceramic surface! Electrical connection Connect the product to a grounded outlet/line protected by a miniature circuit braker of suitable capacity as stated in the "Technical specifications" table.
• Green/yellow cable = (E) (Ground) » or • Black cable = L1 (Phase 1) • Grey cable = L2 (Phase 2) • Blue/Brown cable = N (Neutral) • Green/yellow cable = (E) (Ground) Installing the product If the oven is below: liquid from penetrating between the product and the counter. 1. Prepare the surface of the counter as shown in the figure. 2. Turning the hob upside down, place it on a flat surface. 3.
1 2 3 Hob Installation clamp Counter When installing the hob onto a cabinet, a shelf must be installed in order to separate the cabinet from the hob as illustrated in the above figure. This is not required when installing onto a built-under oven. For example, if it is possible to touch the bottom of the product since it is installed onto a drawer, this section must be covered with a wooden plate.
4 Preparation Tips for saving energy Initial use The following information will help you to use your appliance in an ecological way, and to save energy: • Defrost frozen dishes before cooking them. • Use pots/pans with cover for cooking. If there is no cover, energy consumption may increase 4 times. • Select the burner which is suitable for the bottom size of the pot to be used. Always select the correct pot size for your dishes. Larger pots require more energy.
5 How to use the hob General information about cooking Never fill the pan with oil more than one third of it. Do not leave the hob unattended when heating oil. Overheated oils bring risk of fire. Never attempt to extinguish a possible fire with water! When oil catches fire, cover it with a fire blanket or damp cloth. Turn off the hob if it is safe to do so and call the fire department. • Before frying foods, always dry them well and gently place into the hot oil.
Do not put metal items such as forks, knives or saucepan covers onto your hob since they can get heated. Never use aluminium foil for cooking. Never place food items wrapped with aluminium foil onto the cooking zone. If there is an oven under your hob and if it is running, sensors of the hob can decrease the cooking level or turn off the oven. When the hob is running, keep items with magnetic properties such as credit cards or cassettes away from the hob.
Control panel Specifications Light indicating that the relevant key is functioning On / Off key Keylock key Timer Activation / Deactivation key This product is controlled by means of a touch control panel. Each operation you make on your touch control panel will be confirmed by an audible signal. Always keep the control panel clean and dry. Having damp and soiled surface may cause problems in the functions. High power setting (Booster) key Automatic cooking key Stop key Switching on the cooking zone: 1.
When the time is over, an audible alarm will sound. Touch any key on the control panel to silence the audible alarm. If "H" or "h" is on after the cooking zone has been switched off, it means that the cooking zone is still hot. Do not touch the cooking zones.. Residual heat indicator If "H" symbol is flashing on the cooking zone display, it means that the hob is still hot and can be used to keep a small amount of food warm. The symbol will soon turn to "h" symbol, which means it is less hot.
When the time is over, the timer will turn off the wide surface cooking zone. ''0'' will appear on the left cooking zone display and ''00'' will appear on the timer display. The " " symbol and the light of the timer key on the front left cooking zone display will disappear. 3. By touching the " " keys of any of the left cooking zones. If you touch " " key of any of the left cooking zones while the wide surface cooking zone is active, the cooking zones are separated and turned off.
Key Lock You can activate the key lock in order to prevent the functions from being changed by mistake while the hob is operating. Activating the key lock 1. Touch and hold the " " key for a long time while any of the cooking zones is active. Only one signal sound will be heard first. In this case, your hob is switched to cleaning lock. Then, keep on touching without lifting your finger until you hear 4. Set the desired duration by touching the " "/" " keys. 5.
Automatic cooking function You can cook quickly at 3 different levels by means of this function. 1. Keeping warm 2. Simmering 3. Frying Activating the automatic cooking function without setting the timer 1. Switch on the cooking zone you desire by touching its " " key. 2. Touch the " " key of the cooking zone on which you want to activate the automatic cooking function. 3. The relevant cooking zone will be activated at the keeping warm level after the first touch.
Your hob can be equipped with induction cooking zones with a diameter of 145, 180, 210 and 280 mm depending on the model. Each cooking zone automatically detects the vessel placed on it thanks to the induction feature. Energy is generated only where the vessel comes into contact with the cooking zone and thus, minimum energy consumption is achieved. Operation time limits The hob control is equipped with an operation time limit.
6 Maintenance and care General information Service life of the product will extend and the possibility of problems will decrease if the product is cleaned at regular intervals. DANGER: Disconnect the product from mains supply before starting maintenance and cleaning works. There is the risk of electric shock! DANGER: Allow the product to cool down before you clean it. Hot surfaces may cause burns! • • • • Clean the product thoroughly after each use.
7 Troubleshooting Water drops occur during cooking. • The vapour that arises during cooking can condense and form water droplets when it hits cold surfaces of the product. >>> This is not a fault. Product emits metal noises while heating and cooling. • When the metal parts are heated, they may expand and cause noise. >>> This is not a fault. Product does not operate. • The mains fuse is defective or has tripped. >>> Check fuses in the fuse box. If necessary, replace or reset them.
