User Manuals
20 / EN
Induction Hob / User Manual
• The hob is badly connected on the electrical
network.
• The protection fuse cut-off.
• The looking function is activated.
• The sensitive keys are covered of grease or
water.
• An object is put on a key.
• There is no pan on the cooking zone.
• The pan is not compatible with induction.
• The bottom diameter of the pan is too small.
• The electronic system is defective.
• Disconnect and replug the hob.
• Call after sales
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long
time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of
Booster level and breaking Automatic overheat-
ing
• This is not a failure, the fan continuous to pro-
tect the electronic device.
• The fan cooling stops automatically.
• The cooking zone is still hot [ H ].
• The highest Booster level is set [ 9 ].
• Refer to the chapter “Keep warm“.
• Refer to the chapter “Stop&Go“
• An object or liquid covers the control keys. The
symbol disappear as soon as the key is released
or cleaned.
• The hob is overheated, let it cool and then turn
it on again.
• The air inlet of the ventilator is obstructed, re-
lease it.
• The hob is not connected to the network. Check
the connection and reconnect the hob.
• The hob is not connected to the network. Check
the connection and reconnect the hob.
If one of the symbols above persists, call the after
sales service.