Dryer User Manual BDP700W EN 2960311705/290518.
Please read this user manual first! Dear Customer, Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well.
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
Important instructions for safety and environment • Do not open the door when steam programs are running. Hot water may be expelled. • Before putting laundry in a steam program, stains on it should be removed. • You may only put laundry that is not dirty or stained but permeated with unpleasant odour in steam (odour removal) program. • Do not use any dry cleaning sets or additional materials in a steam program or in any program. 1.1.
Important instructions for safety and environment • Do not use extension cords, multi-plugs or adaptors to connect the dryer to power supply in order to decrease the risk of fire and electric shock. • Power cable plug must be easily accessible after installation. Damaged mains cable should be changed notifying an Authorised Service Agent. If the dryer is faulty, it must not be operated unless it is repaired by an authorized service agent! There is the risk of electric shock! 1.1.
Important instructions for safety and environment Below specified laundry or items must not be dried in the dryer due to the fire hazard: • Garments or pillows bolstered with rubber foam (latex foam), shower hats, water resistant textiles, materials with rubber reinforcement and rubber foam pads. • Clothing cleaned with industrial chemicals. Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems.
Important instructions for safety and environment Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed. • Never attempt to repair the dryer by yourself.
Important instructions for safety and environment • Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. • The final step of the drying cycle (cool-down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them. 1.2 Stacking on top of a washing machine • A fixing device should be used between the two machines when installing the dryer above a washing machine.
Important instructions for safety and environment 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation. 1.4 Child safety • Packaging materials are dangerous for the children. Keep packaging materials away from children.
Important instructions for safety and environment 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life.
Important instructions for safety and environment 1.8 Technical Specifications EN Height (Min. / Max.) Width Depth Capacity (max.) Net weight (± 4 kg) Width Voltage Rated power input 84,6 cm / 86,6 cm* 59,7 cm 56,8 cm 7 kg** 46 kg See type label*** * Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing. *** Type label is located behind the loading door.
2 Your Dryer 2.1 Overview 11 1 2 10 3 9 8 1. Top panel 2. Control panel 3. Loading door 4. Kick plate opening button 5. Ventilation grids 6. Adjustable legs 7. In in models where the tank is placed below, the water tank is inside the toe board 8. Type label 9. Lint filter 10. Water tank drawer (in models where the tank is placed above) 11. Power cord 4 5 7 6 2.2 Package Contents 1 6 2 7 3 4 5 8 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5.
3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. C A A Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility.
Installation 1 2 3 3.6 Warnings about sounds C It is normal to hear a metallic noise from the compressor sometimes during operation. C Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process. 4 C C C Water drain hose should be attached to a height of maximum 80 cm. Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.
4 Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme. Do not dry with dryer At high temperature At medium temperature At low temperature 4.
Preparation Following weights are given as examples. Laundry Cotton quilt covers (double) Cotton quilt covers (single) Bed sheets (double) Bed sheets (single) Large tablecloths Small tablecloths Tea towels Bath towels Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs (10 pieces) T-Shirts Approximate weights (g)* 1500 1000 500 350 700 250 100 700 350 150 300 250 500 350 700 100 125 *Dry laundry weight before washing.
5 Operating the product 5.1 Control Panel 1 1. 2. On/Off/Program selection button Start/Pause button 3. 4. 5.2 Symbols Tank full End/anticreasing Filter cleaning On/Off Filter drawer / Child-proof Heat exchanger lock cleaning Timer Delay Drying Mute Cupboard Dry Volume up Express 14’ Delicates Iron Dry Jeans BabyProtect 5.3 Preparation of the clothes dryer Plug in the clothes dryer. • Open the loading door. • Place the laundry into the clothes dryer without jamming them.
Operating the product 5.4 Programme selection and consumption tablee EN Capacity (kg) Spin speed in washing machine (rpm) Drying Time (minutes) 7 1000 139 You may dry all your cotton laundry in this programme. (T-shirt, pants, pyjamas, baby Cotton Cupboard Dry clothes, underwear, linen, etc.) You can put your laundry in the wardrobe without ironing. 7 1000 174 You may use this programme for extra dryness Cotton Cupboard Dry in thick laundry such as pants, tracksuit.
Operating the product Gentle Care / Shirts It dries the shirts in a more sensitive manner, and causes less creasing and easier ironing. 2 600 55 Express Super Short Dries shirts more delicately and thus causes less wrinkles for easy ironing. 0,5 1200 30 Energy consumption values Programmes Capacity (kg) Cottons-Extra Dry* 7 Contains fluorinated greenhouse gases covered by the Kyoto Protocol. Hermetically sealed.
Operating the product Cancelling the end time function If you want to cancel the end time countdown and start the program immediately: Cancel the program by turning the On/Off/ Program selection knob. Select the program you want and press the Start/Stand-by button. 5.6 Warning indicators C Warning indicators may vary depending on the model of your dryer. Filter cleaning When the program is completed, the warning indicator for filter cleaning turns on.
Operating the product Adding and removing clothes during stand-by If you want to add or remove clothes to/ from the the clothes dryer after the drying program starts: • Press the Start/Stand-by button to put the the clothes dryer in Stand-by mode. The drying operation stops. • Open the loading door while in Standby mode, and close the door after you remove or add laundry. • Press the Start/Stand-by button to start the program.
6 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. C A C Such fiber and lint are generally formed during wearing and washing. Always clean the lint filter and the inner surfaces of the loading door after each drying process.
Maintenance and cleaning C C A Clean metal surfaces of the sensors 4 times a year. Do not use metal tools when cleaning metal surfaces of the sensors. Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! 6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle. A A To drain the water tank: 1.
Maintenance and cleaning • Open the filter drawer cap turning the cap lock on it and pull it out.. • Open the filter drawer by pressing the red button. • Take out the filter drawer sponge. • • • If you observe a layer over the filter which can block the filter, remove the layer washing with a water and then cleaning it. Dry the filter cloth properly before replacing the filter drawer. C There may be no cloth in the filter cassette of your drying machine, depending on its model.
Maintenance and cleaning • Close the kick plate cover. A C Drying without the filter drawer sponge in place will damage the machine! A dirty lint filter and filter drawer will cause longer drying periods and higher energy consumption. 6.5 Cleaning the evaporator Clean the lint accumulated on the fins of the evaporator located behind the filter drawer with a vacuum cleaner. A You can also clean by hand provided that you wear protective gloves. Do not attempt to clean with bare hands.
7 Troubleshooting Drying operation takes too long. • Fibre filter pores might be clogged. >>> Wash the filter with warm water. • Filter drawer might be clogged. >>> Clean the sponge and filter cloth (if any) in the filter drawer. (for the products with a heat pump) • The condenser might be blocked. >>> Wash the condenser.(for the products with a condenser ) • The ventilation grills in front of the machine may be clogged. >>> Remove any objects in front of the ventilation grills that blocks air.
Troubleshooting The lighting inside the drying machine does not turn on. (For models with a lamp) • The clothes dryer might not be turned on with the On/Off button or program might not be selected for machines without an On/Off button. >>> Make sure that the the clothes dryer is turned on. • Lamp might be malfunctioning. >>> Contact an Authorised Service agent to replace the lamp. Filter cleaning warning symbol/LED is on/flashing. • Fibre filter might not be cleaned. >>> Clean the filter.