Dryer User Manual BDP83HW EN BDP83HW/271017.
Please read this user manual first! Dear Customer, Thank you for prefering a Beko Euromed product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well.
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
Important instructions for safety and environment • You may only put laundry that is not dirty or stained but permeated with unpleasant odour in steam (odour removal) program. • Do not use any dry cleaning sets or additional materials in a steam program or in any program. 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation.
Important instructions for safety and environment dryer is faulty, it must not be operated unless B Ifittheistherisk repaired by an authorized service agent! There is of electric shock! 1.1.
Important instructions for safety and environment Below specified laundry or items must not be dried in the dryer due to the fire hazard: • Garments or pillows bolstered with rubber foam (latex foam), shower bonnets, water resistant textiles, materials with rubber reinforcement and rubber foam pads. • Clothing cleaned with industrial chemicals. Items such as lighter, match, coins, metal parts, needle etc. may damage the drum set or may lead to functional problems.
Important instructions for safety and environment A Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying. Use softeners and similar products in accordance with the instructions of their manufacturers. Always clean the lint filter before or after each loading. Never operate the dryer without the lint filter installed. • Never attempt to repair the dryer by yourself.
Important instructions for safety and environment • The final step of the drying cycle (cool-down cycle) occurs without applying heat to ensure that the items are left at a temperature that will not damage them. 1.2 Mounting over a washing machine • A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent.
Important instructions for safety and environment 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation. • The service life of the dryer that you purchased is 10 years.
Important instructions for safety and environment 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life.
Important instructions for safety and environment 1.8 Technical Specifications EN Height (min. / max.) Width Depth Capacity (max.) Net weight (plastic front door usage) Net weight (glass front door usage) Voltage Rated power input Model code 84,6 cm / 86,6 cm* 59,5 cm 60,9 cm 8 kg** 48,5 kg 51 kg See type label*** * Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing.
2 Your Dryer 2.1 Overview 11 1 2 10 3 9 8 1. Top panel 2. Control panel 3. Loading door 4. Kick plate opening button 5. Ventilation grids 6. Adjustable legs 7. Kick plate 8. Type label 9. Lint filter 10. Water tank drawer 11. Power cord 4 5 7 6 2.2 Package Contents 1 6 2 7 3 4 5 8 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* 6. Water Filling Container* 7. Pure Water* 8.
3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user’s manual. If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. C A A Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility. B Do not place the dryer on the power cable.
Installation 1 3 C C C 2 3.6 Warnings about sounds C It is normal to hear a metallic noise from the compressor sometimes during operation. C Water collected during operation is pumped to water tank. It is normal to hear pumping noise during this process. 4 Water drain hose should be attached to a height of maximum 80 cm. Make sure that the water drain hose is not stepped on and it is not folded between the drain and the machine.
4 Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme. • • • Do not dry with dryer At high temperature At medium temperature At low temperature 4.
Preparation Following weights are given as examples. Laundry Cotton quilt covers (double) Cotton quilt covers (single) Bed sheets (double) Bed sheets (single) Large tablecloths Small tablecloths Tea napkins Bath towels Hand towels Blouses Cotton shirts Shirts Cotton dresses Dresses Jeans Handkerchiefs (10 pieces) T-Shirts Approximate weights (g)* 1500 1000 500 350 700 250 100 700 350 150 300 250 500 350 700 100 125 *Dry laundry weight before washing.
5 Operating the product 5.1 Control panel 1 2 3 1. Programme Selection knob 2. Dryness Level Adjustment button 3. Audio Warning Level button 4. Display 5. On /Off/Cancel button 6. Start/Pause button 7. End Time button 8. Favourite button 9. Rapidry / Timer Programmes Selection button 10. Anti-creasing button 4 10 9 8 5 6 7 5.
Operating the product 5.3 Preparing the machine 1. 2. 3. 4. Plug in your machine. Place the laundry in the machine. Press the On/Off/Cancel button for 1 second (long). When your machine is operated for the first time, it starts with the declaration programme (wardrobe dryness for cottons.) C Pressing the On/Off/Cancel button does not mean that the programme has started. Press Start / Pause button to start the program. 5.4 Programme selection 1. 2.
Operating the product • WoolProtect Use this programme to dry woolen garments such as jumpers that are washed according to the instructions. It is recomended that garments would be removed at the end of the programme. The wool drying cycle of this machine has been approved by The Woolmark Company for the drying of machine washable wool products provided that the products are washed and dried according to the instructions on the garment label and those issued by the manufacturer of this machine.(M1606).
Operating the product 5.
Operating the product 5.8 Auxiliary functions Audio Warning The machine will give an audio warning when the programme comes to an end. Use the Audio Warning Level button to adjust the sound level. C You can change the sound level either before the programme starts or while the programme is in progress. Dryness level adjustment selection Dryness level adjustment button is used to adjust the required dryness level. Programme duration can change depending on the selection.
Operating the product Anti-creasing Anti-creasing programme duration may be changed with the Anti-creasing selection button. You can use Anti-creasing function to prevent laundry from creasing if you will not take the laundry out after the program has come to an end. This programme rotates the laundry in every 240 second for selected time to prevent creasing. Following images identify the level changes. 5.
Operating the product • • Open the loading door and put the laundry in. Select the drying program. Press End Time button to set the desired time delay. • Press Start/Pause button. Time Delaying starts countdown and the time delaying symbol lights up on the display. The “:” in the middle of the displayed delay time will flash. • Additional laundry may be loaded / taken out during the End Time period.
Operating the product Cleaning the filter drawer Warning symbol flashes to remind that the filter drawer needs to be cleaned. C For detailed information, see 6 Maintenance and cleaning. 5.13 Child Lock Machine is equipped with a Child Lock which prevents interfering with the current programme flow by pressing any button. To activate the Child Lock: • • Press and hold Childproof Lock button for 3 seconds. Child Lock symbol will appear on the display when the Child Lock is activated.
Operating the product Adding / removing laundry while the dryer is in operation • • • • In order to add or take out laundry after the drying programme has started: Press the Start/Pause button to switch the dryer to Pause mode. Drying process will pause. While in Pause mode, open the loading door, add or take out laundry and close the loading door. Press the Start/Pause button to resume the program.
6 Maintenance and cleaning 6.1Loading Door Inner Surface The hair and fibres that are separated from the laundry during drying process is collected by the Fibre Filter. C A C Fibres are formed during wearing .and washing clothes C Ensure that hair, fibre and cotton balls do not fall into the slot .where the filters are installed • Open both fibre filters (inner and outer filters) remove the hair, fibre, cotton balls with your damp hand or a vacuum cleaner or a cloth.
Maintenance and cleaning • Clean the loading door interior and its washer with a soft damp cloth. 6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle. 6.2 Cleaning the sensor There are dampness sensors in the dryer that detect whether the laundry is dry or not. To clean the sensors: • Open the loading door of the dryer.
Maintenance and cleaning • Drain the water in the tank. • Clean the fibres on the evaporator with a damp cloth / vacuum cleaner with a brush by moving upwards and downwards. • If there is lint accumulation in the funnel of the water tank, clean it under running water. Place the water tank into its seat. • After the cleaning process is completed, place the air router door to its place, move the latches to close it and close the toe board.
7 Troubleshooting Drying operation takes too long. • Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash the fibre filters with warm water and dry. • Evaporator front side may be clogged. >>> Clean the front side of the evaporator. • The ventilation grills in front of the machine may be closed. >>> Remove any object in front of the ventilation grills that blocks air. • Ventilation may be inadequate because the are the machine is installed in is too small.
Troubleshooting Water drips from the loading door. • Fibres might have gathered on the inner sides of the loading door and the loading door gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket surfaces. Loading door opens by itself. • Loading door might be closed completely. >>> Push the loading door until the closing sound is heard. Water tank warning symbol is on/flashing. • Water tank may be full. >>> Empty the water tank. • Water discharge hose might have collapsed.