Operating instructions

Installation
14 BEKOSPLIT® 11
Pos: 63 /Beko Technische Dok um entat ion/ Über schrift en/1/ Inst allation @ 0\ m od_1183637 835418_15098.docx @ 15105@ 1 @ 1
10 Installation
Pos: 64 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Allgemein bl au @ 2\m od_1312966250115_1 5098.docx @ 23122@ @ 1
For safe operation, the plant must only be operated and maintained in accordance with the in-
dications in these operating instructions. In addition, the national and operational statutory pro-
visions and safety regulations, as well as the accident prevention regulations required for the
respective case of application, need to be observed during the employment. This applies ac-
cordingly when accessories are used.
Non-observance of the installation and operating instructions involves risks for persons, sys-
tems, and the environment.
As regards the electrical installation, observe all regulations in force (e.g.
VDE 0100 / IEC 60364).
Electrical works must only be carried out by authorized and skilled personnel!
Pos: 65 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Funktionsprüfung B EKOSP LIT blau @ 2\ m od_13129665 23621_1 5098.docx @ 23155 @ @ 1
System performance tests, installation, setting and maintenance measures must only be car-
ried out by authorized and skilled personnel. Only instructed personnel are authorized to carry
out settings during the operation.
The dosage setting of the BEKOSPLIT
®
11 must, as a matter of principle, only be implemented
by authorized and skilled personnel.
Use original BEKO TECHNOLOGIES reaction splitting agents and filters only! (Not included in
the scope of delivery).
Check the outflowing cleaned water once a week by means of a reference turbidity!
Pos: 66 /Beko Technische Dok um entat ion/ Sich er heit / Warnung unerlaubte E ingriffe gelb @ 2\m od_13129843 81835_15098.docx @ 23398 @ @1
Warning!
Unauthorized interventions!
Unauthorized interventions may endanger persons and plants and lead to malfunction.
Any modification of the plant or of the function parameters that has not been checked and ap-
proved by the manufacturer is potentially dangerous.
Pos: 67 /Beko Technische Dok um entat ion/ Sich er heit / Maßnahmen unerlaubt er Eingriff BS @ 2\ m od_13129851741 74_150 98.docx @ 23572 @ @1
Measures:
• System performance tests, installation, setting and maintenance measures must only be carried out by
authorized and skilled personnel.
• The dosage setting of the BEKOSPLIT
®
11 must, as a matter of principle, only be implemented by au-
thorized and skilled personnel.
Pos: 68 /Beko Technische Dok um entat ion/ Sich er heit / Gef ahr Einf üllen unzu lässiger Flüssi gkeit en B EKOSPLT gelb @ 2\ m od_131298 625575 4_15098. docx @ 23636@ @ 1
Danger!
Filling-in inadmissible liquids!
Inadmissible liquids can damage health and lead to poisoning.
The BEKOSPLIT
®
is only intended for condensate from compressed-air compressors. Other
liquids can be aggressive, corrosive, caustic, toxic, or flammable, and contain fire-accelerating
constituents. In addition, harmful gases may be released.
Pos: 69 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Umgebungs bedin gungen b lau @ 2\m od_13129677 25001_ 15098.docx @ 23221@ @ 1
NOTE!
Ambient conditions!
In the event of external overheating, parts of the plant can be destroyed.
Observe the permissible storage and transport temperature, as well as the permissible operat-
ing and ambient temperature.
Protect the plant against direct sunlight and heat.
Do not install the plant in areas where frost is likely to occur or outdoors!
Pos: 70 /Beko Technische Dok um entat ion/ Sich er heit / Vorsicht G esundheitsschä dige nde Koh lenw asserst off e gelb @ 2\ m od_1312968017604 _15098.docx @ 23254 @ @ 1