Operating instructions

Electrical installation
BEKOSPLIT® 11 17
Pos: 78 /Beko Technische Dok um entat ion/ Über schrift en/1/ Elektr ische Inst allat ion @ 0\m od_118363850 7355_15098.docx @ 15116 @ 1 @ 1
11 Electrical installation
Pos: 79 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Allgemein bl au @ 2\m od_1312966250115_1 5098.docx @ 23122@ @ 1
For safe operation, the plant must only be operated and maintained in accordance with the in-
dications in these operating instructions. In addition, the national and operational statutory pro-
visions and safety regulations, as well as the accident prevention regulations required for the
respective case of application, need to be observed during the employment. This applies ac-
cordingly when accessories are used.
Non-observance of the installation and operating instructions involves risks for persons, sys-
tems, and the environment.
As regards the electrical installation, observe all regulations in force (e.g.
VDE 0100 / IEC 60364).
Electrical works must only be carried out by authorized and skilled personnel!
Pos: 80 /Beko Technische Dok um entat ion/ Sich er heit / Hin wei s Funktionsprüfung B EKOSP LIT blau @ 2\ m od_13129665 23621_1 5098.docx @ 23155 @ @ 1
System performance tests, installation, setting and maintenance measures must only be car-
ried out by authorized and skilled personnel. Only instructed personnel are authorized to carry
out settings during the operation.
The dosage setting of the BEKOSPLIT
®
11 must, as a matter of principle, only be implemented
by authorized and skilled personnel.
Use original BEKO TECHNOLOGIES reaction splitting agents and filters only! (Not included in
the scope of delivery).
Check the outflowing cleaned water once a week by means of a reference turbidity!
Pos: 81 /Beko Technische Dok um entat ion/ Sich er heit / Gef ahr Net zspannung 2 gelb @ 2\m od_13129836 88896_1 5098.docx @ 23332 @ @ 1
DANGER!
Supply voltage!
The operation and maintenance of electrically-powered plants and devices must only be under-
taken by correspondingly qualified and authorized personnel. Prior to carrying out maintenance
works, no matter which type, the following notes must be considered:
Pos: 82 /Beko Technische Dok um entat ion/ Sich er heit / Maßnahmen Netzspann ung BS @ 2\ m od_131304 7339589_1509 8. docx @ 23838 @ @ 1
Measures:
• Make sure that no parts of the plant are energized, and that they cannot be connected with the electric
supply mains during servicing.
• The device must not be started up if the power lines are damaged.
• The BEKOSPLIT
®
11 must not be operated if parts of the housing were removed.
Pos: 83 /Beko Technische Dok um entat ion/ Sich er heit / Gef ahr fehlende Erdung gelb @ 2\ m od_13129840 60338_15098.docx @ 23365@ @ 1
DANGER!
Missing grounding!
When the grounding (protective ground) is missing, there is the risk in the event of malfunction,
that contactable, conductive components may carry supply voltage. Touching of such parts
leads to an electric shock with injury and death.
Pos: 84 /Beko Technische Dok um entat ion/ Sich er heit / Maßnahmen f ehlend e Erdung @ 0\m od_122485268 3164_15098.docx @ 15274 @ @ 1
Measures:
• Observe all regulations in effect during electrical installation (e.g. VDE 0100 / IEC 60364).
• Carry out maintenance works only when the device is de-energized.
• It is imperative to ground the plant and the device, or the equipment grounding conductor must be con-
nected in accordance with the provisions.
• Any electrical works must only be carried out by authorized and skilled personnel .
Pos: 85 /Beko Technische Dok um entat ion/ I nstallation/B EKOSPLI T/E-Anschluss BS@ 3\m od_1314259 042441_ 15098.docx @ 25722 @ @1
The BEKOSPLIT
®
11 splitting plant is ready for connection. The supply voltage 110 … 230 VAC / 50-60 Hz
(see type plate) is provided via a cable with a safety plug.
Internal components are supplied via a power supply unit with an output voltage of 24 VDC.
Pos: 86 /Beko Technische Dok um entat ion/ I nstallation/B EKOSPLI T/ElektrI nstallat ionB S11 @ 2\m od_1314012 092192 _15098. docx @ 24664 @ @ 1